Monacor DMR520 Schnellstartanleitung Seite 4

Press " " button to show the 4 channel display modes.
Press "－" button to change the setting in the menu.
8) SEQ /＋
Press "SEQ" button to activate the call monitor function, and press again to quit.
Press "＋" button to change the setting in the menu.
9) or POWER
Press this button long enough to turn on/off your DVR.
Note: Under the recording mode, please stop recording before turning off your DVR.
10) "CH1" "CH2" "CH3" "CH4"
Press one of the buttons to select the channel to display.
11) REC
Press "REC" button to activate manual recording.
12) or PLAY
Press this button to play the recorded video.
13) UP / PAUSE, DOWN / STOP, LEFT / REWIND, RIGHT / FORWARD,
Press one of the direction buttons to move the cursor up/down/left/right.
Under the playback mode:
Press " " or " " button to pause / stop playback. Press " " or " " button to fast rewind / forward.
SLOW ZOOM
14) or
AUDIO
Press these two buttons at the same time to select live or playback sounds of the audio channels.
SEQ.
15) or
P.T.Z
Press these two buttons at the same time to enter / exit the PTZ control mode.
In the PTZ control mode → Zoom in: Press "＋" button ; Zoom out: Press "－" button
Adjust PTZ angle: Press direction buttons to turn up/down/left/right
16) Switch NTSC / PAL System
Press " " or "POWER" button on the DVR front panel to shutdown the DVR.
After shutdown the DVR, press and hold
again to reboot the DVR (press until the monitor shows video images).
Note: The DVR will automatically detect PAL/NTSC system. But you can also manually switch between PAL
and NTSC systems.
17) Key Lock
Press "MENU" + "ENTER" on the DVR front panel at the same time to lock keys and to log in with another user name.
18) Open / Close the CD Writer
For Model 1 and Model 5, press "
(Audio)
(PTZ)
(switch to NTSC) or
" button to open / close the CD Writer.
(switch to PAL) first, then press the power button
-3-