Assembling Ehrenkind Sliding Board - Ehrenkind RB01 Gebrauchsanweisung

•
Remember: The maximum height of fall for this product depends on the
climbing equipment used with it. You should therefore choose a suitable
shock­absorbing material as the surface.

Assembling Ehrenkind sliding board

WARNING!
!
Risk of injury!
Improper handling of the Ehrenkind sliding board can lead to serious injuries.
•
Make sure that the sliding board is securely hooked into a pole of the
climbing frame used with it. For this purpose, struts are attached on both
sides so that the sliding board can be used as a slide or as a chicken
ladder.
•
Do not use the Ehrenkind sliding board on hard surfaces such as
concrete, parquet or laminate. Fatal falls can occur.
•
Use the Ehrenkind sliding board on a suitable, shock­absorbing surface.
These include: soft carpets, mattresses (not too thin, not too thick),
gymnastics, sports & yoga mats.
•
Regularly check whether the shock­absorbing surface is correctly placed.
•
Do not install the Ehrenkind sliding board in a place with strong sunlight.
Children can get dizzy or sunburned while playing.
•
Do not allow children to play on the Ehrenkind sliding board until it is fully
assembled.
•
Crushing hazard: Be careful with your fingers when suspending.
NOTICE
Risk of damage!
Improper handling of the Ehrenkind sliding board can result in damage to the
board.
Do not deviate from the instructions for use.
EN
15