Inhaltsverzeichnis; Safety Instructions - Carrera DIGITAL 132 Montage- Und Betriebsanleitung
Teil b
Vorschau ausblenden
Andere Handbücher für DIGITAL 132:
- Bedienungsanleitung (155 Seiten) ,
- Montage- und betriebsanleitung (53 Seiten) ,
- Kurzanleitung (2 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Table of contents
Safety instructions
Contents of package
Technical advice for assembly
Welcome
Welcome to the Team Carrera!
These operating instructions contain important information regard-
ing the assembly and operation of your Carrera DIGITAL 132 race-
track. Please read them carefully and keep them in a safe place af-
terwards. If you have any queries, please do not hesitate to contact
our distributor or visit our website:
carrera-toys.com
Please check the contents for completeness and possible transport
damage. The packaging contains important information and should
also be retained.
We hope you will derive a lot of pleasure from your new Carrera
DIGITAL 132 track.
8
Safety instructions
8
• WARNING! Not suitable for children under 36 months. Danger of
8
suff ocation due to small parts which may be swallowed. Caution:
8
risk of pinching caused by function.
9
9
• WARNING!
9
This toy contains magnets or magnetic components. Magnets at-
9
tracting each other or a metallic object inside the human body may
9
cause serious or fatal injuries. Seek medical attention immediately if
10
magnets are swallowed or inhaled.
10
10
• The transformer is not a toy! Do not short-circuit the transformer's
connections! Note to parents: Regularly inspect the transformer for
10
damage to the cable, plug or housing! Only operate the toy with rec-
10
ommended transformers! The transformer may no longer be used
11
if it is damaged! Only operate the racetrack with a transformer! If
11
play is interrupted for longer periods, it is recommended to separate
11
the transformer from the power supply. Do not open transformer or
11
speed controller housings!
11
12
Important note to parents:
12
Transformers and power supply units are not suitable to be used as
12
toys. The use of such products needs to be constantly supervised
12
by the parents.
12
12
• Regularly check the track and cars for damage to cables, plugs
13
and housings! Replace defective parts.
• The car racetrack is not suitable for outdoor operation or operation
13
13
in wet locations! Keep away from liquids.
13
13
• Do not place any metal parts onto the track to avoid short-circuits.
13
Do not place the track in the immediate vicinity of delicate objects,
as these could be damaged by cars hurled from the track.
• Disconnect the plug before cleaning or servicing the racetrack!
Only use a damp cloth for cleaning, no solvents or chemicals. When
it is not in use, store the track in a dry and dust-protected location,
preferably in the original cardboard box.
• Do not operate race track at face- or eye-level - risk of injury due
to cars being catapulted off the track.
• Misuse of transformer can cause electrical shock.
• The toy is only to be connected to Class II equipment
bearing the following symbol.
• The toy must only be used with a transformer for toys.
• Not to be used with controllable transformers.
Technical advice for assembly
• If the supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similary qualifi ed persons in order to
avoid danger.
Note:
The vehicles and the Control Unit may only be operated again in
a completely assembled condition. Assembly may only be carried
out by an adult. Children of 8 years and above, or persons with
reduced physical, sensory or mental capacity, or lack of experience
and knowledge may use this appliance under the condition that they
are supervised or instructed concerning the use of the appliance
and understand the associated risks. Children must not play with
the appliance. Cleaning and user maintenance must not be per-
formed by children without supervision. Instruct the child not to try
and recharge non-rechargeable batteries because of the danger of
explosion.
2
3
4
1
Connecting track + Control Unit
1
Double lane change section input
2
Double lane change section output
3
Infrared sensor:
4
The infrared sensor MUST be located on the switch
that functions as the entry rail (dark diode).
Werbung
Inhaltsverzeichnis
