Reimo Wallaby 2 Benutzerhandbuch Seite 12

DE
Step 4
EN
IT
ES
FR
FI
4. The ladder can now be used as a lever to open the tent.
DK
5. Rest the ladder on the ground, and enter
SE
the tent. Release the four bungee cords
from one side of the tent. Note: if the angle
of the ladder is too upright you will require
the optional ladder extension (see next
page).
6. Retrieve the sprung steel rods (SSR),
there are then positioned to tension the
outside window awnings and flysheet/win-
dow awning. Insert the other end of the
SSR into the hole in the base of the roof
tent, passing through the eyelet in the roof
tent skirt. This will require you to bend
the SSR so that the angle of the SSR is
equal to the angle of the hole into which it
should be inserted.
7. Repeat all the above steps in the reverse
order to pack away your roof tent.
Step 4
Step 5
Step 6
Step 7
12