Wiring Instructions - For U.k.only - VEVOR VS5500 Handbuch

WIRING INSTRUCTIONS – FOR U.K.ONLY.
SAFETY NOTES – FOR REWIREABLE OR MOULDED PLUG
The mains lead of this appliance may be already fitted with a BS 1363 13A plug.
Should the fuse need to be replaced, a 13A ASTA approved BS 1362 fuse must be
used.
If your socket outlet is not suitable for the plug, then the plug must be removed (cut
off if it is a molded on plug) and an appropriate one fitted. Warning: dispose of a
plug that has been cut from the power supply cord, as such a plug is hazardous if
inserted in a live 13A socket outlet elsewhere in the house.
Always replace the fuse cover after fitting a fuse. The plug must NOT be used if the
cover is omitted or lost until a replacement is obtained – make certain that only the
correct fuse cover is used and fitted.
For plugs with a detachable fuse cover the replacement must be the same as the
color insert in the base of the plug, or as directly by the embossed wording on the
base of the plug.
U.K. ONLY – FITTING A PLUG
Important: the wires in this lead are colored in accordance with the following codes
Blue, Neutral, Brown, live. Please read the instructions given below before connect-
ing the cord to a plug. If in doubt, please consult a qualified electrician.
As the colors of the wires in the mains lead of this appliance may not correspond
with the colored marking identifying the terminals in your plug, proceed as follows:
·The wire which is colored BLUE must be connected to the terminal which is marked
with the letter "N" or colored BLACK
·The wire which is colored BROWN must be connected to the terminal which is
marked with the letter "L" or colored RED.
Neither core is to be connected to the earth terminal of a three-pin plug.This
appliance requires a 3 fuse ASTA approved to BS 1362.
18