Alarm Setting; Battery Safety Instructions - Levenhuk Wezzer Teo TH10 Bedienungsanleitung

Levenhuk Wezzer Teo TH10 Thermohygrometer
EN
Getting started
Open the battery compartment cover and insert the battery according to the correct polarity. Close the cover.
Time setting
Press the MODE button and hold it for 3 seconds. The digits that are to be set are flashing. Press the ADJ button to change the value, and
then press MODE to continue. Keep pressing the button in order to set the other parameters (12/24h, etc.).
Finally, press the MODE button to save the settings and exit.

Alarm setting

Press the MODE button and hold it for 3 seconds. Press the MODE button, and then press the ADJ button. Press the MODE button and hold
it for 3 seconds to set the alarm. The digits that are to be set are flashing. Press the ADJ button to change the value, and then press MODE
to continue.
The setting order: Hours > Minutes.
Finally, press the MODE button to save the settings and exit.
History record
•
Press the MEMORY button to display the max./min. temperature and humidity.
•
To clear the max./min. temperature and humidity records, press and hold the MEMORY button.
Specifications
Air humidity, units of measurement
Operating humidity range
Temperature, units of measurement
Operating temperature range (main unit)
Operating temperature range (wired probe)
Time format
Screen
Probe length, m
Power supply
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these
•
instructions.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local
•
specialized service center.
Protect the device from sudden impact and excessive mechanical force.
•
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire, and other sources of
•
high temperatures.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
•
Only use accessories and spare parts for this device that comply with the technical specifications.
•
Check this device and its cables and connections for any possible damage before use.
•
Never attempt to operate a damaged device or a device with damaged electrical parts! Damaged parts must be replaced immediately by
•
an authorized service agent.
If a part of the device or battery is swallowed, seek medical attention immediately.
•
Children should use the device under adult supervision only.
•

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one
time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior
to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment
that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high
temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off
devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as
prescribed by your country's laws.
% (RH)
10... 99%
°C
–10... +50°C
–50... +70°C
24 hours, 12 hours
monochrome
1.5
1pc AAA battery
3