Backlight Setting; Battery Safety Instructions - Levenhuk Wezzer SN10 Bedienungsanleitung

Levenhuk Wezzer SN10 Sauna Thermometer
EN
The kit includes: sauna thermometer, user manual, and warranty.
Getting started
•
Open the battery compartment cover (12) and insert 2 AAA batteries according to the correct polarity. Close the cover.
•
Extend the wired probe (14) into the sauna room to measure its temperature. Attention! The main unit should be installed in a place where
a maximum temperature of +70°C (+158°F) is not exceeded.

Backlight setting

Press the backlight button (1) to turn on the backlight. The backlight lasts 8 s.
History record
To clear the min/max. temperature and humidity records, press and hold the CLEAR button (9).
Temperature units
Press the °C/°F button (11) to switch between °C and °F.
Specifications
Air humidity, units of measurement
Operating humidity range (main unit)
Temperature, units of measurement
Operating temperature range (main unit)
Operating temperature range (wired probe)
Probe length, m
Power supply
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
The base station should be placed in a room within the manufacturer's recommended humidity and temperature ranges. Take the necessary
precautions when using the device with children or others who have not read or who do not fully understand these instructions. Do not try
to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service
center. Protect the device from sudden impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories
and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with
damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately. Children should use the
device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one
time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior
to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment
that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high
temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off
devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as
prescribed by your country's laws.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty
against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk
accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles
you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions
are met.
For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
% (RH)
10... 99%
°F, °C
–40... +70°C (–40... +158°F)
–40... +150°C (–40... +302°F)
3
2 ААА batteries
4