hillvert HT-FORBES-7000 Bedienungsanleitung Seite 46

Part
number
2 Blade axis
3 Chain guard
4 Split pin
6 Blade
13 Chain drive adapter
a) Fit the chain driving adapter (13) to the axle (2).
b) Put the chain (6) on the adapter (13) and connect it with the chain
protection (4) and pins (3).
c) Tighten the chain by tightening the screw (55).
d) Install the chain guard (14) onto the fastener (70) and tighten securely
with the bolt (67).
Description Part
number
14 Chain guard
55 M12 bolt
67 M8x45 hexagon bolt
70 Guard fastening
75 Side cover
Description