Parts And Components; Before Use; Operation - cecotec TOAST&TASTE 9000 DOUBLE WHITE Bedienungsanleitung

1. PARTS AND COMPONENTS

Fig. 1.
1. Slots
2. Stop button
3. Reheat button
4. Defrost button
5. Toasting level knob
6. Toasting lever
7. Crumb-collecting tray
8. Bun holder

2. BEFORE USE

- Take the product out of the box and remove all packaging materials, stickers, etc.
- Make sure all parts and components are included and in good conditions. If any visible
signs of damage are observed, contact the Technical Support Service immediately.
- Use a damp cloth to clean the toaster.
- Check that all components are properly assembled and place the appliance on a flat,
stable surface.
- Make sure that there is enough space between the toaster and the wall or other appliances,
as the toaster will become hot during operation.
- Before using the toaster for the first time, it is important to perform a toasting process
without bread. Press the toast lever until it latches into place.
- When the toasting is finished, the toast levers automatically jump up. The toaster is now
ready to be used with bread.
Warning
A slight odour and smoke might appear when operating the device for the first time. This is due
to manufacturing material residues and does not affect the appliance's operating.

3. OPERATION

Tips for ideal toasting results
- Different types of bread have varying moisture content. Therefore, the same toast
darkness setting can produce different results.
TOAST&TASTE 9000 DOUBLE WHITE
TOAST&TASTE 10000 EXTRA WHITE
ENGLISH
29