Parts And Components; Before Use - cecotec TOAST&TASTE 2L Bedienungsanleitung

1. PARTS AND COMPONENTS

Fig.1
1. Main body
2. Crumb-collecting tray
3. Toasting slot
4. Lever
5. Intensity knob (7 levels)
6. STOP button
7. Reheat button
8. Defrost button
9. Bun holder

2. BEFORE USE

- This product includes a safety package to protect it during transport.
- Unpack the appliance and keep the original packaging carton and materials in a safe place.
- It will help prevent any damage if the product needs to be transported in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Plastic wrapping can cause suffocation hazards for babies and young children.
- Make sure all packaging materials are out of reach of children.
- Inspect all parts of the appliance for visual damage.
- Unwind the power cord completely and inspect it for damage.
- Do not use the product if it or its cord have been damaged or are not working properly.
In case of damage, contact the official Technical Support Service of Cecotec for advice,
repairs or returns.
- Remove any adhesive labels and wipe the outside of the toaster with a damp cloth.
- Make sure no packaging materials remain in the toasting slot and no object has fallen
inside the toaster.
- Make sure you have read and understood all instructions and warnings in this instruction
manual.
- Pay particular attention to the safety instructions on previous pages.
- Place the toaster on an even, heat-resistant surface. Do not place the toaster near heat
sources, places with high humidity levels, or combustible materials.
- Plug the toaster into an appropriate wall outlet. The plug must have easy access, so that in
case of an emergency, it can be easily unplugged.
- Clean the toaster (read the "Cleaning and maintenance" section). Run the toaster at
maximum intensity level for at least 2 minutes.
ENGLISH
TOAST&TASTE 2L
47