Preparing And Loading Dishes - Kuppersberg GFM 5572 W Bedienungsanleitung

ENGLISH
WATER HARDNESS
°dH ¹ Mmol/l
)
0–5 0–0,9
6–11 1,0–2,0
12–17 2,1–3,0
18–22 3,1–4,0
23–34 4,1–6,1
35–45 6,2–8,0
1) German degree of measurement for the water hardness
2) Millimol, internationel unit for water hardness
3)
Every cycle with a regeneration operation consumes additional 2.0 litres
of water, the energy consumption increases by 0.02 kWh and the program extents
by 4 minutes.
* factory setting
PREPARING AND
LOADING DISHES
 Consider buying utensils which
are identified as dishwasher-proof.
 For particular items, select a pro-
gram with the lowest possible temper-
ature. To prevent damage, do not take
glass and cutlery out of the dishwasher
immediately after the program has end-
ed.
For washing the following
cutlery/dishes
Are not suitable
 Cutlery with wooden, horn china
or mother-of-pearl handles
 Plastic items that are not heat
resistant
Setting on the
water softener
2)
1
2
3
4*
5
6
TECHNICAL PASSPORT
Digital display
stalls
H1
H2
H3
H4
H5
H6
 Older cutlery with glued parts
that are not temperature resistant
 Bonded cutlery items or dishes
 Pewter or cooper items
 Crystal glass
 Steel items subject to rusting
 Wooden platters
 Items made from synthetic fibres
Are of limited suitability
 Some types of glasses can be-
come dull after a large number of wash-
es
 Silver and aluminum parts have
a tendency to discolour during washing
 Glazed patterns may fade if ma-
chine washed frequently.
Dishwasher
Regeneration occurs
every X program
sequence
3)
No regeneration
10
5
3
2
1
71