Technical Data - AEG TP7050TW Benutzerinformation

18 www.aeg.com
Problem
The display shows
The display shows Error code (e.g. E51).
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
12.1 If the drying results are
not satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.

13. TECHNICAL DATA

Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
All manuals and user guides at all-guides.com
.
Possible solution
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in
the washing machine again.
Ensure that the room temperature is higher
than +5°C and lower than +35°C. Optimal
room temperature is 19°C to 24°C.
Set the Zeitprogramm (Time Drying) or the
Extratrocken (Extra Dry) programme.
If you want to set a new programme, deacti-
vate and activate the appliance.
Make sure that the options are suitable for
the programme.
Deactivate and activate the appliance. Start
a new programme. If the problem occurs
again, contact the Service centre.
• Incorrect setting of the conductivity
sensor ( See chapter "
Adjustment of the remaining laundry
moisture degree " for better setting).
• The airflow slots are clogged.
• Room temperature is too low or too
high ( optimal room temperature 19°C
to 24°C )
850 x 600 x 600 mm (maximal 665 mm)
1100 mm
950 mm
850 mm (+ 15 mm - feet regulation)
118 l
8 kg
230 V
50 Hz
66 dB
2)
Settings -