Hitachi RAK-DJ18PHAE Bedienungsanleitung Seite 11

(4) Switch ON your air conditioner now. Once your air conditioner is switched on or by restoring the factory
settings by remote control, the air conditioner would be set into pairing mode for 10 minutes. Wi-Fi LED on
air conditioner's panel (see diagram in status indicator section) will blink for 3 times repeatedly showing
air conditioner is in pairing mode. Wi-Fi LED keeps blinking till communication with Wi-Fi router is succeeded.
When the airCloud Home module reset operation is performed through the remote control. the pairing mode
can be entered without restarting the air conditioner.
(5) Click "Change Wi-Fi Network", select the Wi-Fi access point of the Built-in airCloud Home module with SSID
printed on the bundled SSID&KEY Label, input password (the KEY). Click right arrow icon on the screen top
to continue for connecting your smart phone with the Adapter.
(6) Waiting for the built-in airCloud Home module to connect to your home router. When communication is
established, Wi-Fi LED on panel will be continuously ON after blinking.
(7) Waiting for the Smartphone to connect with your home network. If your Smartphone is connected to another
wireless network then click on Change Wireless Network & select home network.
(8) Please assign a name to your registered air conditioner. If you assign a custom name to your air conditioner,
it will not be compatible with your smart speaker (integrated with Alexa or Google Assistant), so we
recommend that you select a name from the pre-defined list.
(9) Your air conditioner has been successfully configured.
(1) (2)
(8)
(7)
1) If communication cannot succeed within 10 minutes, please follow the instructions of the App to complete the
pairing process again.
2) If a user in the group has already registered some air conditioning units, the other users in the same group can
also control the unit.
3) If the air conditioning is not configured with router, at power on unit enters into pairing mode every time for 10
minutes with Wi-Fi indication blinking for 3 times.
4) If the air conditioning is already configured with router, and router detection is available then at power on, unit will
skip the pairing mode & try to connect to router.
5) Please enter the SSID name of the air-conditioner to proceed with the pairing process if unable to scan QR code.
(3) (4)
(9)
- 11 -
(6)
(5)