Cleaning And Maintenance - ECG AP1 Compact Pearl Bedienungsanleitung

5. Enter the WiFi and network password in the application according to the application instructions.
6. Click on the next step and set the EZ mode in the upper right corner of the application screen (basic preset
EZ mode). Check to confirm that the WiFi icon on the display is flashing quickly. *
7. Click on the next step "next" in the application.
8. The purifier will connect automatically, follow the application instructions.
* If the icon no longer flashes, you need to start the setting from the beginning.

CLEANING AND MAINTENANCE

Switch off and unplug the appliance before cleaning and maintenance. Never immerse the appliance in water.
Wipe the surface of the appliance with a soft cloth. Do not use aggressive abrasive cleaners or scourers.
Store the appliance in a cool, dry and ventilated place. Only turn the appliance up very slowly and carefully to
avoid damaging it. Never turn the appliance when in operation!
TROUBLESHOOTING
In the event of a malfunction, follow the table below.
If you are unable to solve the problem according to the possible solutions in the table below, contact the
service center. Never try to repair the appliance yourself.
Problem
The appliance cannot be switched
on
The fan does not work
Possible cause
The plug is not inserted in the
electrical outlet.
The filter cover is fitted incorrectly.
The plug or cable is damaged.
The power source is not working.
The air inlet or outlet is blocked.
The appliance is not on.
The motor is loose or damaged.
There are loose or foreign objects
inside the appliance.
The appliance is placed on an
uneven surface.
Solution
Connect the appliance to the
power supply and switch it on.
Install the filter cover according to
the operating instructions.
Contact a service center.
Check that there is power in the
outlet.
Remove all packaging from the
filter/s.
Connect the appliance to the
power supply and switch it on.
Contact a service center.
If the items cannot be removed
without tampering with the
appliance, contact a service
center.
Place the appliance on a flat
surface.
11