Trouble Shooting - Ebinger Donkey XL Bedienungsanleitung

DE EN

11. Trouble shooting

In case of further malfunctions, the error can be localised using the listed step. Repair work may
only be carried out by an authorised service centre.
Incorrect operation, maintenance or repair may result in damage to the electrics or mechanics of the unit.
LED indicator flashes green, yellow, red
simultaneously
LED indicator on the thumb lever lights up (green,
yellow or red), but electric wheelbarrow does not move
LED indicator on the thumb lever lights up (green, yellow
red), but after pressing the thumb lever for the first time
The lever, the LED switches to flashing yellow + red.
LED indicator flashes
Battery indicator drops quickly while driving
and returns to normal when not in use
Battery indicator shows 100% after charging, but drops
to low but drops to a low charge level after a short time.
Battery indicator does not show increased charge level
after charging charge level
Unit runs, but grinding noises when driving
Unit runs, but noises at the motor/ gearbox
Motor turns audibly, but no drive
Lank wheels have play on the axle
Swivel castors have play on the fork axle
FR ES IT
Thumb lever not in zero position
► Jammed or blocked, Bring to zero position
Problem persists
► Replace thumb lever
Automatic switch-off activated
(automatically after 20min of non-use)
► Switch off and switch on again
Engine brake disengaged
► Engage again (See chapter 8)
► See separate description
Tolerance of the display by 10-15% normal
► No error
Battery worn out
► Renew
Charger defective (see also chapter 7)
► Renew
Charging socket no contact
► Replace plug/cable
Battery defective
► Renew
Check electric brake
►Replace if defective
Check engine mount
► Renew
Transmission motor to gearbox interrupted
► Repair
Bearing defective
► Renew
Close fork axle
► renew
23