Button Description - DGT DGT2500 Bedienungsanleitung

English
1. Introduction
Congratulations on your purchase of the DGT2500 chess clock. The DGT2500 is the Official
FIDE Chess Clock, approved and recommended by the international chess federation FIDE. It
is in full accordance with the FIDE Laws of Chess and suitable for all games and competitions.
Sound
Freeze
Forced
move
counter
Period
Figure 1. DGT2500 Display

2. Button description

Move the cursor, or go to the previous setting screen.
Show option information: In
this button to see the timing category, and detailed settings.
Forced move counter: In
to set the clock so that the period transition is based on the number of moves.
Decrease value of a selected digit by 1.
Sound: In
turn the Sound On or Off.
Start, or Pause the clock.
Arbiter mode: When clock is in
3 seconds, to enter the Arbiter mode where you can edit the current time and
move count.
Accept+Skip: In
selection. If you are in a manual setting, press this button to accept all changes
and skip further screens. The clock will immediately go to
Increase value of a selected digit by 1.
Move counter: Hold to this button to show the number of finished moves for
each side
Move the cursor, or go to the next setting screen.
Accept: In
you are in a manual setting, this button will move you to the next setting screen.
Freeze: In
On/Off. So that the time
On/Off: Use the white button on the bottom to turn the clock On or Off. If you
ON/ OFF
press it quickly twice, you reset the clock in the last used option.
2
DGT2500 Manual
Run / Pause
Flag / Selection bar
"Wait for start"
"Selection mode"
"Selection mode"
"Wait for start"
Option
"Wait for start"
"Wait for start"
mode, hold this button for 2 seconds
"Pause"
or mode, hold this button for 2 seconds to
"Pause" mode, press and hold this button for
press this button to accept the current
press this button to accept the current selection. If
mode, hold this button for 2 seconds to turn Freeze
"Freezes"
for both sides, when one player reaches 0:00.
Hours Minutes
"Option select"
and during
"Wait for
Seconds
Low battery
Period
Flag /
Selection bar
press
start".