Quick Setup; Manual Setup; Selection Mode - DGT DGT2500 Bedienungsanleitung

3. Quick setup

1. Press the on/off button to turn on the clock.
2. Navigate through the options using the plus and minus buttons.
3. Press play/pause or right arrow to select an option.
4. Set the lever in the correct starting position. On the display the bars will be visible on the
side that will start (the white side).
5. Use minus, plus or left arrow buttons to turn sound, freeze, and/or move counter on or off.
6. Press play/pause to start the game.
7. Press play/pause to pause and resume the game.
8. When a player reaches zero, the flag is shown by the blinking bar on the top and bottom of
the display.
9. Press on/off at the bottom quickly twice to restart the DGT2500 and start a new game.

4. Manual setup

1. Press the on/off button to turn on the clock.
2. Select the manual setting option for the timing method you wish to use.
3. Use the left and right button to navigate through the digits; use + and - to edit the digit
value.
4. At the last digit, press to go the next setting screen. Edit values per screen for your desired
game time.
5. If you do not wish a second or third period leave the value at zero.
6. If you do not wish to use the
7. At the last screen, press to exit the manual setup and go to
8. Please note, you can press play/pause at any moment during the manual set up to skip
further screens and immediately go to
9. The manual setup is now complete. Steps 4 through 9 from the quick set up above can now
be followed to finish setting up and start your game.
5. Full setup and clock modes
In sections 3 and 4 of this manual a short explanation is given of how to quickly set up the
clock. In this chapter we will go over the functions and modes of the clock in more detail.

Selection mode

When you turn on the clock it starts in
through all options using the plus and minus buttons. For each possible option the display will
show the starting time, the total number of periods, the default freeze, sound or forced move
counter settings. And the two bars indicating which side is white.
Figure 2. Selection mode
If freeze is activated, the clock will not be able to count down on either side if one side has
reached 0:00. Freeze is on by default for all Bonus and Delay options but can be turned off.
"Forced move counter"
"Wait for
"Selection mode". In this mode you can navigate
leave the move counter value at zero.
"Wait for
start".
start".
DGT2500 Manual
3