Drying The Supernova Led - MICRO-EPSILON ELTROTEC SuperNova LED Betriebsanleitung

Cleaning
6.2
If the SuperNova LED comes in contact with liquid, rinse with isopropyl alcohol and then dry with a damp
cloth or leave it to air dry.
i
Do not allow the SuperNova LED to remain in liquid cleaning solution for prolonged period of time.
NOTICE
> Damage or destruction of the light source or the battery
i
This will prevent any trapped fluid from entering the battery compartment and exposing the electronics to
fluids.
i
ELTROTEC SuperNova LED

Drying the SuperNova LED

Dry air is recommended to reduce contamination of the optical components and reduce the possibility
of oxidation of the materials used in the construction of the SuperNova LED.
Ensure there is no trapped liquid between the battery hatch door and body prior to removing the battery
hatch door.
In addition, thoroughly dry the battery hatch door seal around the O-Ring with a cloth prior to removing
the battery hatch door.
Use compressed air only to a limited extent since compressed air can lead to damages.
Page 32