Notice
Make sure the battery is fully charged before use.
Inspect, set and calibrate relevant functions before use.
Do not replace the battery in water. Be sure to replace it in a dry environment
where the device and hands are dry.
Do not place heavy objects on the product.
The surface of the product must not contact with volatile or acidic substances
such as gasoline or rubber cement, or sharp objects.
To protect the service life of the motor, do not run it continuously for more than 30s
in a non-water environment. In the case of any abnormalities (such as a burning
smell), immediately release the switch to stop the device and cut off its power
supply.
Do not use this product directly on the beach to prevent sand, shells, or other
debris from being sucked into the propeller.
Factors such as location, temperature, depth, and water flow under different
conditions can affect the buoyancy of this product. If the product is released at
this time, it may sink.
Be sure to remove the product from the water when it is not being used.
Do not use it in the case of malfunction.
Do not repair the product without Sublue authorization. Improper repair may result
in water leakage, damage, fire, or electric shock.
Be sure to read the User Manual
carefully before use, and be familiar
with all precautions!
Symbol Explanation:
Warning
Notes
*
Annotation (detailed explanations
and instructions)
Contents
©2019 SUBLUE Copyright
Product Overview
Introduction
Features
Battery Introduction
1
1
1
3
4
5
6
6
6
6
7
7
7
8
8
8
10
13
13
13
14
14