Sublue WhiteShark Navbow+ Bedienungsanleitung Seite 17

1. Synchronization of Underwater Exercise Journal Data
Synchronize the exercise data recorded in the underwater scooter to your mobile
phone and edit and generate your personal underwater exercise journals.
Enter the journal synchronization page from SublueGo
console.
Choose "synchronization" which will display the journal list
saved in your device. You can select journals that you want
to download and then press "synchronization". Then, the
device will transmit data to your mobile phone.
When RAM of underwater scooter is completely stored,
the device will automatically delete the earliest data to
save later ones. Please synchronize data in time.
2. Geomagnetic Declination Setting
Geomagnetic declination setting improves the accuracy of compass. Therefore,
before you use the product, especially when you have changed the use area of
the product, you should obtain local geomagnetic declination from reliable
sources and set it in SublueGo.
Note that the magnetic declination value will be positive or negative!
* Magnetic declination refers to the angle between the magnetic meridian and the
geographical meridian at any point on the earth's surface. It is different in various places, while
it is also different even in the same place with different time. If the magnetic needle points to
the north pole and heads towards the east, then the angle of magnetic declination is positive,
and if it heads towards the west, then it is negative.
3. Safety Lock
When this function is set to start, the device will be locked. Though you can power
the device on, you cannot operate it. Meanwhile, the screen will display the photo
of "safety lock start". You can use the device when the function is lifted.
If you are worried that the device is incorrectly operated or children use it
without supervision, you are suggested to use this function.
24
4. Self-cleaning
With this function, the product can be deeply cleaned and sea water remaining in
the product will be also removed.
Please use fresh water for cleaning. During the operation of self-cleaning
function, the propeller will move, so please be cautious!
Self-cleaning will last for 3 minutes.
5. Low Battery Buzzer Reminder
When this function is started and charge is less than 30%, the device will send out
buzzer warnings.
6. Fresh Water/Sea Water
Set the function according to the water environment (fresh water or sea water) in
which the product is applied to improve the accuracy of depth display.
Water environment in various regions causes depth to be displayed in error.
Please confirm that the depth data and spare digital or mechanical
instruments show the same reading before use.
7. Depth Pre-warning Setting
The user can set the depth value that he/she expects to be noticed through this
function, and when the depth exceeds your setting value, the device will send out
warnings.
确定
关闭
5m
6m
7m
8m
9m
10m
Depth value setting by mobile phone
When an alarm is triggered a shutdown warning is displayed. Wait five seconds
and press the multi-function dial once to cancel the warning.
07.0
m
WARNING
Depth warning interface
25