Battery; Battery Charging - Sublue WhiteShark Navbow+ Bedienungsanleitung

Device in calibration
CALIBRATING
Device calibration
CALIBRATION
succeeded
SUCCESSFUL
Device calibration
CALIBRATION
failed
FAILED
Under self-cleaning
Safety lock
Firmware updating
In case of any malfunction warning, you should immediately stop use and contact
Sublue after-sales service center or authorized service organizations for support in
time.
Permanent damages will be made if the product is used beyond its depth limit,
please do not do that.
Please always notice the battery changes and make a safe return.
Please use fresh water rather than sea water for self-cleaning.
12
light
light
light
When self-cleaning mode is started, it
light
will operate for 3 minutes
When entering safety lock mode, you
cannot operate the device. You should
Flash
unlock it in App before re-operating the
device
light

Battery

1 Introduction to Battery
The battery is a high-performance lithium-ion battery with a capacity of 10,670 mAh,
designed specifically for the Navbow series underwater scooter. It features
high-performance cells that provide sufficient power for the Navbow
Please carefully read and strictly follow the requirements in the User Manual
and those on the battery surface sticker. The user shall undertake all
consequences if he/she fails to follow the usage requirements.
The battery must be charged by the dedicated charger supplied by Navbow
Sublue is not responsible for any consequences of charging through unofficial
Navbow chargers (including other Sublue models).
+
Make sure to fully charge the battery before using it for the first time.
It takes about less than 2 hours to fully charge the battery with fast charger
adapters.
2

Battery charging

Connect the charger to the AC supply (100-240V AC, 50/60Hz).
Charging
Fully charged
Socket
Adapter
.
+
Bottom of charging stand
Charging stand and battery
.
+
13