Remote & Accessories; Channel List - Salora 43QLED440/2 Bedienungsanleitung

Headphone: Turn this option on if you want to
route the sound of the audio commentary to the
TV's headphone output.
Volume: Adjust the volume level of the audio
commentary.
Pan and Fade: Turn this option on if you want to
hear the audio commentary more clearly, when it
is available through broadcast.
Audio for the Visually Impaired: Set the audio
type for visually impaired. Options will be available
depending on the selected broadcast.
Fader Control: Adjust the volume balance
between the main TV audio (Main) and audio
commentary (AD).
Captions: Configure the settings for the captions.
You can set the language, text size and style
using the options of this menu. Highlight Display
and press OK to turn on or off the sample caption
demonstration.
Text to speech: With text-to-speech feature, your
TV can convert written text into voice text to help
visually impaired people listen to the information
they are unable to read. You can choose your pre-
ferred engine, configure the engine settings, and
speech rate, play a short demonstration of speech
synthesis, and display default language status using
the options of this menu.
High Contrast Text: Increase the contrast of the
menu options and texts to make them easier to read.
Highlight this option and press OK to turn this
feature on or off.
Restart: A confirmation message will be displayed,
select Restart to proceed with restarting. The TV will
switch off/on first. Select Cancel to exit.
Remote & Accessories
You can use wireless accessories, such as your remote
control (depends on the model of the remote control),
headphones, keyboards or game controllers with your
Android TV. Add devices to use them with your TV.
Select this option and press OK to start searching
available devices in order to pair them with your TV. If
available highlight Add accessory option and press
OK to start the search. Set your device to pairing mode.
Available devices will be recognised and listed or
pairing request will be displayed. To start pairing, select
your device from the list and press OK, or highlight
OK and press OK when the pairing request appears.
Connected devices will also be listed here. To unpair
a device, highlight it and press OK. Then highlight the
Unpair option and press OK. Then select OK and
press OK again to unpair the device from the TV. You
can also change the name of a connected device.
Highlight the device and press OK, then highlight
Change name and press OK again. Press OK again
and use the virtual keyboard to change the name of
the device.

Channel List

The TV sorts all stored channels in the Channel List.
Press the OK button to open the Channel List in Live
TV mode. You can press the left directional button
to scroll up the list page by page, or press the right
directional button to scroll down.
To sort the channel or find a channel in the channel
list, press the Yellow button to display the Channel
Operation options. Available options are Sort and
Find. Sort option may not be available depending on
the selected country during the initial setup process.
To sort the channels highlight Sort and press the OK
button. Select one of the available options and press
OK again. The channels will be sorted according to
your selection. To find a channel highlight Find and
press the OK button. Virtual keyboard will be displayed.
Enter all or a portion of the name or number of the
channel you want to find, highlight the check mark
symbol on the keyboard and press OK. Matching
results will be listed.
To filter the channels press Red button. Select Type
options will be displayed. You can select among TV,
Radio, Free, Encrypted and Favourites options to
filter the channel list or select All channels option to
see all installed channels in the channel list. Available
options may differ depending on the operator selection.
Note: If any option except All channels is selected in
the Select Type menu, you can only scroll through the
channels that are currently listed in the channel list using the
Programme +/- buttons on the remote.
Editing the Channels and the Channel List
You can edit the channels and the channel list using
the Channel Skip, Channel Swap, Channel Move,
Channel Edit and Channel Delete options under the
Settings>Channel>Channels menu. You can access
the Settings menu from the Home Screen or from the
TV options menu in Live TV mode.
Note: The options Channel Swap, Channel Move and Chan-
nel Edit may not be available and appear as greyed out de-
pending on the operator selection and operator related settings.
You can turn off the LCN setting in the Settings>Channel
>Channels menu, as it prevents channel editing. This option
might be set to On by default depending on the selected
country during the initial setup process.
Managing Favourite Channel Lists
You can create four different lists of your favourite
channels. These lists include only the channels that
are specified by you. Press the OK button to display
the channel list.
To add a channel to one of the favourite lists, highlight
that channel in the channel list and press the Blue
button. Favourite list selection menu will be displayed.
Highlight the list/s you want the channel to be added
English - 22 -