Table In The Living Area; Using The Table Outside; Third Sleeping Area (Optional) - Karmann-Mobil DEXTER 580 2022 Bedienungsanleitung

Living

12.1 Table in the living area

The table is attached on one side to a rail below the window and can be detached for use as an outdoor
table or for supporting the cushions to create the third sleeping area. It is equipped with a support leg,
the lower section of which can be folded 90°.

12.2 Using the table outside

Another rail is supplied on the outside of the kitchen unit where the table can be attached.
An additional table top is stored underneath the main table top. This can be pulled out if required
(sample illustration).

12.3 Third sleeping area (optional)

The seating cluster of your vehicle can be converted into a full third sleeping area (optional equipment).
1. Press the release button on the support leg of the table and fold the lower part by 90°.
2. Attach the table to the lower rail, below the window.
3. Position the additional table top between the kitchen unit and resting on the table top, as shown.
For this, the two holes on the underside of the additional table top have to rest on the two pins of
the support rail on the kitchen unit, and the folding leg of the additional table tap has to be folded
out by 90°. To fold out the leg, it has to be released in the direction of the arrow (see figure).
4. Place the two grey mattress cushions on the table top and additional table top as shown.
EN 94