AEG BD321P Benutzerinformation Seite 48

Clean all accessories after each use and let them dry. Use only a microfibre cloth with warm
water and a mild detergent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.
Accessories
11.2 How to clean: Cavity
embossment
Clean the cavity embossment to remove
limestone residue after cooking with steam.
Step 1
Pour: 250 ml of white vinegar into
the cavity embossment. Use maxi‐
mum 6% vinegar without any addi‐
tives.
For the function: SteamBake clean the oven for every 5 - 10 cooking cycles.
11.3 How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
11.4 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
48 ENGLISH
Step 2
Let the vinegar dissolve the lime‐
stone residue at the ambient tem‐
perature for 30 minutes.
If there are other appliances installed in
the same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Clean the cavity with warm water
and a soft cloth.
1
2
CAUTION!
Step 3