Velleman CCTVPROM18 Kurzanleitung Seite 6

ADVANCED CONFIG
SCHEDULE SETTINGS
Refer to the full user manual on the included CD-ROM for more details.
Setting Date and Time
Before using the DVR, the time and date shall be set to get a valid time stamp.
1. Right-click the screen and enter the admin password.
2. Click the QUICK START icon.
3. Select TIME SETUP to set date and time.
Note: once recording started, do not change date or time as this will make it very difficult to find back the recorded files.
Note: when using the DVR for the first time and the correct time is set, leave it on for at least 48 hours.
Password Setting
1. Right-click the screen and enter the admin password.
2. Click the SYSTEM icon.
3. Go to ACCOUNT. Select the password you want to set and click EDIT.
Note: an operator cannot access the main menu, only the quick menu bar (see below).
4. Press the cursor up (
the next character, or use the mouse to select the desired value. Repeat this for all four password numbers.
Note: the default admin password is admin.
Record Settings
1. Right-click the screen and enter the admin password.
2. Use the arrow button to select ADVANCED CONFIG.
3. Use the arrow button to select RECORD.
4. Select the record type you want to set (manual, event or timer).
5. In "CHANNEL", select "ALL" to apply the changes to all channels.
6. Or, select "BY CHANNEL" to set the image size, image per second & image quality individually for each channel.
7. Use the arrow button to select GENERAL.
8. Set the image size, images per second (I.P.S.) and image quality.
9. Select APPLY.
Refer to the full user manual on the included CD-ROM for more details.
Audio Playback
Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the quick menu bar (see below).
The current audio channel is indicated in the status bar.
Switch Users
1. The DVR can be accessed as administrator (
2. To switch between users, click on the user icon (
3. Click the key lock icon (
8. Push Status Configuration
If you have an iPhone, iPad, or Android mobile device, you can use the DVR's push status function: the DVR will send a
notification to your device when an alarm event occurs.
The alarm events are:
 ALL
 VIDEO LOSS
 HDD FULL
 POWER ON
To do so, you need to install the EagleEyes app on your mobile device (see Installing the EagleEyes App below).
V. 02.1 – 30/01/2014
Click to set CAMERA, DETECTION, ALERT, NETWORK, DISPLAY, RECORD, DEVICES,
DCCS, IVS & NOTIFY.
Click to set record timer, detection timer & alarm timer.
) or down ( ) button to select the value of the first number and press enter to save and go to
) or operator (
) and enter the password of the desired profile.
 HDD (CLEAR / NO HDD / OVER TEMPERATURE)
 NET LOGIN
 KEY UNLOCK
CCTVPROM18
), icons are indicated in the status bar.
or ) to lock the current session (
6
).
 NETWORK
 UPS
 SYSTEM ABNORMAL.
©Velleman nv