Velleman CCTVPROM18 Kurzanleitung Seite 4

Not included:
 hard disk: HD500GB/S, HD1TB/S & HD2TB/S
 VGA & DVI monitor: MONSCA4N1
 computer mouse.
5. Overview
Refer to the illustrations on page 2 of this manual.
Front panel
HDD
ALARM
LED indications TIMER
PLAY
POWER
Navigation
button
MENU Press to enter the main menu.
ENTER Press to confirm settings.
List the information of the recorded files.
LIST
QUICK SEARCH / RECORD / MOTION / ALARM / TIMER / FULL LIST
PLAY Press to play the recorded video.
SLOW In playback mode, press to play the recorded file slowly.
ZOOM In live or playback mode, press to enlarge the image of the selected channel.
SEQ Press to show all screens sequentially in full screen mode. Press again to quit.
4CH: Press to show the 4 channel display mode.
1–4 Press a button to select the corresponding channel.
= SLOW + ZOOM
AUDIO
Press SLOW and ZOOM simultaneously to select live or play-back sounds.
= SEQ +
P.T.Z.
Press SLOW and
SEARCH Opens the QUICK SEARCH function.
Connect a USB flash drive for video backup to one USB port; connect a USB mouse to the other.
USB port (2 x)
Note: do not connect two USB flash drives or USB mice at the same time.
Rear panel
LAN port Connect the DVR to a local network by plugging a network cable into this port.
VGA Connector for video monitor (not included).
AUDIO IN 4 audio input channels to connect four external audio sources, e.g. from cameras with audio.
AUDIO OUT 1 audio output to connect to an audio device, e.g. a speaker (mono).
VIDEO IN 4 video input channels to connect 4 external video sources, e.g. cameras.
HDMI 1 video output channel to connect the DVR to the main monitor.
EXTERNAL I/O Use a 9-pin DSUB connector to connect external signals, e.g. alarm, PTZ...
19V DC Power supply input
V. 02.1 – 30/01/2014
CCTVPROM18
Reading or recording activities on the hard disk.
An alarm was triggered.
Timed recording is enabled.
The DVR is in playing mode.
DVR power is on.
In settings mode:
 Press ▲ / ▼ / ◄ / ► to move the cursor accordingly.
 When changing a setting, press + or – to increase or decrease the setting.
In playback mode:
 Press  to pause playback.
 Press  to stop playback.
 Press  to fast forward.
 Press  to fast rewind.
simultaneously to enter or exit PTZ control mode.
4 ©Velleman nv