Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Power Distribution:
AC input: 2x 50 W
DC input: 2x 100 W each; each channel has a maximum of 100 W
DC Power Supply
The charger may be also used as 17.5 V/max. 100 W DC power supply. In the AC input mode, you can connect an appliance (a
LED lamp etc.) to the XT60 DC input socket. Check the specification of your device - be sure the device may be operated at 17.5
V AND the required input power is lower than 100 W (5.5 A). Due to the limited output power of the internal AC power supply
you should not use the charger for charging in the same time, especially if the appliance was an inductive load (like an electric
motor; its starting current might be 5-12 times higher than the regular running current).
WARNINGS AND ERROR MESSAGES
Error message for Abnormal Battery Connection
Unplug and re-connect all plugs to ensure proper connection and polarity. Check to make sure that all connectors are free of
dirt, grease, or oxidation.
7
Werbung
