CCV Pad Next Erste Schritte Seite 36

Procedure
1. Connect
2. Turn on
3. Start startup
4. Select your
language
5. Enter Teminal-ID
6. Select PU
7. Setup
Communication
8. Optional: setup
cash register
36 CCV Pad Next - First steps
Connect the terminal to the power source via the power
adapter.
The device starts up.
Start the commissioning with „YES".
Select the desired terminal language.
Enter and repeat the 8-digit terminal ID provided by your
network operator.
Optional: Select the desired PU. The PU corresponds to a
communication dial-up set called by your network operator
along with the terminal ID. If only one dialing set was stored,
there is no query of the PU.
Select one or more communication types (LAN, Wifi, 3G/4G).
If you are commissioning several types of communication,
you can switch between them by softkey (eg Wifi - 3G).
If you want to operate the terminal with a cash register, the
cash register protocols ZVT and O.P.I. via TCP/IP are always
active and do not need to be activated. Only in the case of
ZVT via a serial RS232 connection, the cash register interface
must be activated accordingly.