How to turn on the water pump
In the power-on state, long press the WASH button
1
for 3 seconds, the water pump is turned on.
Short press the WASH button to turn off the water
2
pump.
4.8 External Power Supply Function
Connect the car cigarette lighter with the product's
DC output port to supply power to the product, at
this time the EXTPOW icon will be light on.
After the EXTPOW icon is on, the following functions are available but the
functions cannot be used at the same time.
LED output
Water pump function
5. Product Charging Method
Ready to charge: power adapter that supports PD protocol,
USB-C To USB-C cable,Cigarette lighter plug to DC wires;
Two Charging Ways:
Using the USB cable to connect the power adapter with USB-C charging port
1
of the product
Using the cigarette lighter plug to DC wires to connect the car cigarette
2
lighter and DC input port of the product
The battery indicator on the screen is on in marquee, the IN icon is on,
indicating that the product is charging normally,if the two lightning symbols are
on means fast charging.
When the power of the product is exhausted or in the case of low power, please
charge it in time to prevent abnormal battery undervoltage. Long-term zero
battery state may cause the product to fail to charge.
6. Charge Your Phone with USB-A
Ready to charge your phone:USB-A To USB-C cable,
mobile phone (if the mobile phone supports 9V2A of QC3.0
protocol, it can support 9V2A fast charge)
Connect the A port of the USB cable to the
product, and the C port to the Type-C charging
port of the mobile phone. After the charging is
successful, the "OUT" icon of the product flashes
(Note: When the USB-C output is used alone to
charge the electrical device successfully, the
OUT icon flashes, When USB-C and USB-A are outputting at the same time,
the OUT icon will light up).
USB-C output
USB-A output
Air pump function
LOKITHOR
11