Abus CASA20550 Bedienungsanleitung Seite 282

tele
vx <integer , excluding 0>
vy <integer>
vs 0 ~ 7
focus auto
far
near
iris auto
open
close
speedlink 0 ~ 4
return <return page>
ePTZ Camera Control
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/eCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>][&auto=<value>][&zoom=<value>] [&zooming=<value>&zs=<value>]
[&vx=<value>&vy=<value>&vs=<value>]
[&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>][&speedapp=<value>] [&return=<return
page>]
PARAMETER VALUE
channel <0~(n-1)>
stream <0~(m-1)>
To zoom without stop for farer view with current speed
The slope of movement = vy/vx, used for joystick control.
Set the speed of movement, "0" means stop.
To do auto focus
To focus on farer distance
To focus on nearer distance
Let the Network Camera control iris size
Manually control the iris for bigger size
Manually control the iris for smaller size
Issue speed link command.
Redirect to the page <return page> after the parameter is assigned.
The <return page> can be a full URL path or relative path according to
the current path. If you omit this parameter,
it will redirect to an empty page.
DESCRIPTION
Channel of video source.
Stream.
282