TypeS StartYa 8Qi Gen2 Bedienungsanleitung Seite 19

Charging the Jump Starter
At home:
1. Plug included Micro USB Charging Cable into a USB-A port on 2A USB wall adapter (not included).
2. Connect the Micro USB Charging Cable into the Micro USB Charge Input Port on the Jump Starter.
3. Disconnect the Jump Starter when it is fully charged. Store the Jump Starter in a safe place when not
in use.
19
NOTE: In order to reduce the risk of re or electric shock, an
adapter shall be chosen that is suitable for the application and
is certi ed as a Class 2 or LPS power supply or power adapter.
Fully charge the Jump Starter upon receipt. Check battery
status periodically and recharge every 2-3 months and after
every use to maintain the ef ciency and to prolong the life of
the internal battery.
EN