iGuzzini Portonovo Bedienungsanleitung Seite 11

EN
INSTRUCTIONS FOR CHARGING THE BATTERY
CAUTION:
The battery must be charged in dry environments.
It is recommended to fully charge the battery on first use.
• "The Class III appliance must be powered by a SELV source or equivalent"
(e.g. complaint with 62368-1 – type ES1)"
• Connect the terminal with the USB-micro plug in the appropriate socket (pay
attention to direction) placed in the base of the lighting fixture and make sure that
during charging the product is firmly resting on a plane to avoid it falling.
• A blue LED, positioned near the USB socket, lights up during charging and
turns off when charging is completed. If during charging the blue LED flashes, it
means there are problems:
- The internal and/or external temperature drops below 0°C or rises above
45°C, charging automatically stops and this is highlighted by the flashing of the
blue LED. Once the atmospheric conditions have been restored, the blue LED
lights up steadily again;
• Autonomy when fully charged is about 9 hours. If the lamp is on and connected
to the battery charger, the indicated charging times are not guaranteed;
• When the red LED, positioned near the USB socket, lights up, it means that
the battery has dropped to 10%, it is recommended to connect it to the feeder.
Moreover, to save battery life, do not leave it connected to the feeder when the
blue LED is off.
• The lamp turns on and off with a simple touch.
• By holding down you get the dimming effect, which increases or decreases
the light intensity.
The battery can be replaced by the customer (ART. PC39).
For the relevant instructions, please refer to the instruction sheet provided with the
replacement battery art. PC39.
N.B.: For information on LED replacement please contact iGuzzini illumi-
nazione.
MODEL PROTECTED BY COMMUNITY DESIGN REGISTRATION
11