Herunterladen Inhalt Inhalt Diese Seite drucken

HBM Machines H130052 Bedienungsanleitung Seite 28

6 liter professionelle manuelle und pneumatische flüssigkeitspumpe inklusive 4 flüssigkeitsschläuche
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10.Always allow the engine to cool before removing the radiator cap or expansion tank cap. The
cooling system is under pressure. Failure to allow the engine to cool before attempting to remove the
cap could result in serious injuries.
11.The warnings, precautions, and instructions discussed in this manual cannot cover all possible
conditions and situations that may occur. The operator must understand that common sense and
caution are factors which cannot be built into this product, but must be supplied by the operator.
12.For safety purposes and the prevention of damage to expensive components.it is advised that the
user understand basic automotive repair and have a working knowledge of automotive systems.
13.We believe the information contained herein to be reliable. However, general technical information
is given by us without charge and the user shall employ such information at his or her own discretion
and risk.We assume no responsibility for results or damages incurred from the use of such information
in whole or in part. Always refer to specific instructions and technical information supplied by vehicle
manufacturer.
14.The manufacturer declines any and all responsibility for damage to vehicles or components if said
damage is the result of unskillful handling by the operator or of failure to observe the basic safety rules
set forth in the instruction manual.
15.Used oil, antifreeze, brake fluid and transmission fluid contain chemical compounds that can be
harmful to humans and animals. When managed properly, used oil may again be of beneficial use.
Used oil may be blended and recycled as a heating or industrial fuel and also may be re-refined and
made into new lubricants. Persons who perform maintenance on their own vehicles are responsible
for managing the used fluids in a manner that is protective of human health and the environment and
to follow all local laws and regulations concerning their disposal.
SPECIFIC SAFETY INSTRUCTIONS AND WARNINGS
CAUTION: This equipment is intended for professional use only and only for the
applications specified in in this manual.
!
CAUTION: DO NOT attempt to extract fluids at temperatures greater than
175°Fahrenheit (80° Celsius).
CAUTION! This equipment is designed for servicing a variety of vehicles;
however, differences in makes and models may not allow this equipment to be
used as intended by the manufacturer. DO NOT attempt to force this equipment
to fit an application for which it was not designed. In addition to the guidelines
set by this manual, always follow the manufacturer provided vehicle mainte-
nance manual prior to attempting service of any kind.
WARNING: DO NOT use this equipment with gasoline or other flammable
liquids or with fluids at temperatures above 175°F(80°C).
WARNING: Keep away from open flames or excessive heat.
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis