To Close The Gas Boiler; To Install The Gas Boiler Cover Plate; Mounting The Gas Boiler; To Install The Gas Boiler - Daikin Altherma EHYKOMB33AA Installations- Und Bedienungsanleitung

9 Unit installation
9.2.3

To close the gas boiler

1 Hook the top of the front panel into the top of the gas boiler.
2 Tilt the bottom side of the front panel towards the gas boiler.
3 Screw both screws of the cover.
4 Close the display cover.
9.2.4

To install the gas boiler cover plate

The boiler cover plate is an optional product.
Installation and operation manual
16
9.3

Mounting the gas boiler

INFORMATION
Removing the top plate of the indoor unit makes it easier to
install the gas boiler.
9.3.1

To install the gas boiler

1 Lift the unit from the package.
36kg
2 Remove the top plate from the indoor unit.
3 The bracket to mount the boiler on the heat pump module is
already mounted to the backside of the gas boiler.
4 Lift the boiler. One person lifts the gas boiler on the left side (left
hand on the top and right hand on the bottom) and another
person lifts the gas boiler on the right side (left hand on the
bottom and right hand on the top).
5 Tilt the top of the unit at the position of the indoor unit mounting
bracket.
6 Slide the boiler downwards to fix the boiler bracket onto the
indoor unit mounting bracket.
Daikin Altherma hybrid heat pump – gas boiler module
EHYKOMB33AA
4P353067-1L – 2022.09