Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product
Information
1.
This is an i-Size Enhanced
Child Restraint System. It is
approved according to UN
Regulation No.129, for use in,
i-Size compatible vehicle seating
positions as indicated by vehicle
manufacturers in the vehicle
users' manual.
2.
If in doubt, consult either the
Enhanced Child Restraint System
manufacturer or the retailer.
Materials Plastics, metal, fabrics
Patent No. Patents pending
Concerns on
Installation
1
3
See images
-
1
DO NOT install this child
restraint on vehicle seats that
face sideways or rearward with
respect to the moving direction
of the vehicle.
It is recommended to install this
child restraint on the rear vehicle
seat.
DO NOT install this child restraint
on vehicle seats movable during
installation.
2
DO NOT place rear-facing
child restraint on front seat
with air bag, because death or
serious injury may occur. Please
reference vehicle owner' s
manual for more information.
3
This child restraint is suitable for
vehicle seats with ISOFIX anchor
points.
Installation
with base
4
13
See images
-
4
Fit the ISOFIX guides with the
ISOFIX anchor points.
The ISOFIX guides can protect
the surface of the vehicle seat
from being torn. They can also
guide the ISOFIX connectors.
5
After placing the base on the
vehicle seat, pull the load leg
downward to floor.
6
There are 10 adjustable positions
for ISOFIX. Press the ISOFIX
adjuster button to extend the
ISOFIX.
7
Make sure that both ISOFIX
connectors are securely attached
to their ISOFIX anchor points.
The colors of the indicators on
both ISOFIX connectors should
be completely green.
If a tighter install or increased
cabin space is required, then
13
press the ISOFIX adjuster button
6
7
-1 and push to adjust.
8
After attaching the ISOFIX, pull
the load leg downward to floor.
When the load leg indicator
shows green, the load leg is
installed correctly. Squeeze the
load leg releasing button, then
adjust the load leg length.
9
The load leg has multiple
positions. Make sure the load
leg is in full contact with the
vehicle floor pan. When the
load leg indicator shows red
this means the load leg is in the
wrong position. When the load
leg indicator shows green this
means the load leg is in the right
position.
10
Check to make sure the base is
securely installed by pulling on
both ISOFIX connectors.
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
The load leg must be installed
correctly with green indicator.
Please refer to rear facing mode
and recline positions mode in
section to use the child restraint.
11
To remove from the vehicle
press the ISOFIX adjuster button
and pull the base back from the
seat.
12
Then press and release the
connectors from the vehicle's
ISOFIX.
13
To prevent damage during
transit, press the ISOFIX adjuster
button and fold the connector
completely.
Recline Adjustment
14 15
See images
14
Squeeze the recline adjustment
button , to adjust the child
restraint to the proper position.
The recline angles are shown as
15
. Please recheck the load leg
position after reclining.
There are 5 recline positions for
rear facing mode and 5 recline
positions for forward facing
mode.
Use Side Impact
Protection
16 17
See images
16
The enhanced child restraint is
delivered with removable side
impact protection. This side
impact protection must be used
on the door side of the vehicle
for best protection. Installation
16
shown in
.
14
Werbung
Inhaltsverzeichnis
