Electrical Connection - STIEBEL ELTRON ULTRONIC Plus Bedienung Und Installation

INSTALLATION
Installation
f Mark out the 3 drilling positions with reference to the drilling
template or the wall mounting bracket.
f Drill the holes and insert the provided rawl plugs.

10.2 Electrical connection

WARNING Electrocution
Carry out all electrical connection and installation work
in accordance with national and regional regulations.
WARNING Electrocution
In the case of a permanent connection, ensure the ap-
pliance can be separated from the power supply by an
isolator that disconnects all poles with at least 3 mm
contact separation.
38 | ULTRONIC Plus | ULTRONIC Premium
WARNING Electrocution
Ensure that the appliance is connected to the earth con-
ductor.
Property damage
!
Observe the type plate. The specified voltage must match
the mains power supply.
Property damage
!
f When making the connection to a standard safety
socket (in the case of a power cable with mains
plug), ensure that the socket is freely accessible after
the appliance has been installed.
The power supply can be connected directly to the appliance or
via a power cable with mains plug.
www.stiebel-eltron.com