Installation; Fitting The Wall Mounting Bracket - STIEBEL ELTRON ULTRONIC Plus Bedienung Und Installation

INSTALLATION

Installation
10. Installation

10.1 Fitting the wall mounting bracket

The appliance is intended for wall mounting using the wall mount-
ing bracket supplied.
f Place the appliance on a soft underlay to prevent damage to
the surface.
1.
f Undo the locking screw on the underside of the appliance
using the Torx key included in the standard delivery.
f Pull the wall mounting bracket downwards.
f Remove the wall mounting bracket from the appliance.
www.stiebel-eltron.com
2.
3.
Notice
f When positioning the wall mounting bracket, ob-
serve the position and length of the power cable.
Notice
f Use the relevant standard values as a guide for
the installation height (see chapter "Preparations /
Standard values for the installation height").
Property damage
!
If you hit electrical cables when drilling, the fuse will trip
and the cable will be damaged. If you hit pipes when
drilling, there is a risk of water damage.
f Make sure that you do not damage any electrical ca-
bles or pipes when drilling.
ULTRONIC Plus | ULTRONIC Premium | 37