Maintenance And Storage; Electrical Safety - Parkside PWH 2800 A1 Originalbetriebsanleitung

GB
fessional training. All work not
mentioned in these instructions
may only be performed by our
service centre.

Maintenance and storage

a) If you stop the machine for
maintenance, inspection, sto-
rage or to change accessories,
switch off the power source,
disconnect the machine from the
mains supply, and ensure that
all moving parts have come to
a standstill. Allow the machine
to cool down before inspection,
changing settings etc. Maintain
the machine with care and keep
it clean.
b) Store the machine in a dry pla-
ce and out of reach of children.
c) Always allow the machine to
cool down before storage.
d) When maintaining the shred-
ding unit, be aware that it can
always still move even if the
power source is switched off by
the locking function or protecti-
ve equipment.
e) Replace worn or damaged parts
in the interests of safety. Only
use original replacement parts
and accessories.
f) Never try to circumvent the
locking function or protective
equipment.
Additional safety instructions
for machines with a collecti-
on box
• Switch off the machine before
attaching or removing the col-
lection box.
26

Electrical safety

Caution: This is how to avoid
accidents and injuries from
an electric shock:
• Prior to use, always check the
connecting cable and extension
cable for signs of damage or
wear and tear. If the cable gets
damaged during use, it must be
disconnected from the supply
network immediately. DO NOT
TOUCH THE CABLE BEFORE IT
HAS BEEN DISCONNECTED
FROM THE POWER SUPPLY. Do
not use the machine if the cable
is damaged or worn.
• Keep the extension cable away
from dangerous moving parts to
prevent damage to cables that
can lead to contact with live
parts.
• Use the strain relief provided to
attach the extension cable.
• Damaged cables, couplings
and plugs or connection cab-
les that do not comply with the
regulations must not be used. If
the mains cable is damaged, im-
mediately remove the plug from
the mains socket. Never touch
the mains cable unless the mains
plug has been removed.
• If the connection cable of this
device is damaged, it must be
replaced by the manufacturer or
their customer service or by a si-
milarly qualified person in order
to avoid hazards.
• Do not use the device if the switch
cannot be turned on and off. Da-
maged switches must be replaced
by our service centre.