User Settings Panel - Hettich HettCube 60 Bedienungsanleitung

6.15

User settings panel

AB69601en
■
Software version
■
Manufacturer's address
■
Manufacturer's website
Fig. 48: Info window (example)
Press the icon to save the "Download" folder (with the Operating
Manual) on the USB flash drive. After you have inserted the USB
flash drive into the USB port, wait a few seconds until the message
"Flashdrive connected" appears on the display. Press the
write the service data on the USB flash drive – contact Customer
Service for more information.
Press to go to the main screen.
The USB flash drive must be unmounted before
removing it from the USB port.
Go to the main menu
can:
Change the name of the unit – by default, the device
serial number is entered.
Change the language in the unit's menu.
Set the time after which the screen will be dimmed.
Turn the sound On or Off. Critical alarms will continue
emitting an alarm tone.
Set the time after which the user is returned to the home
screen. Available settings: off, 1 min, 3 min, 5 min, 10
min.
02.2023 / Rev. --
and press the icon. In this window you
Operation
icon to
53 / 82