Hettich HettCube 60 Bedienungsanleitung Seite 135

AB69601en
Recording of data to the USB flash drive. Both .csv files
(separated by semicolons when opening with a spread-
sheet) and .plkx files (opened using the LabDesk appli-
cation (accessory)) are available.
Before removing the USB flash drive from the USB port,
it must be unmounted.
Deleting data
The events in the event log are sorted chronologically. However, while
it may occur that the event "Program restarted" will not be displayed
according to the chronology, the date and time of the event will be
correct. This is not an error.
Before removing the USB flash drive from the USB
port, it must be unmounted.
Information signs in the event log:
Information event
Alarm event
Error
Warning
Possible events:
Program Start
Program Stop
Program Edit
Program End
Device On
Device Off
Door opened
Open door alarm
start
Door closed
Open door alarm
stop
02.2023 / Rev. --
Starting the program
Stop the program.
Changing the program parameters
Program is completed
The device is switched on (at the main
switch)
The device is switched off (at the main
switch)
The unit door is open
Open door alarm has been activated
The unit door is closed
Open door alarm has been deactivated
Operation
51 / 82