Product Features; Technical Data; Noise/Vibration Information - Bosch GSH 16-28 Professional Originalbetriebsanleitung

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle (insulated gripping surface)
(2) On/off switch
(3) Carrying handle

Technical data

Demolition hammer
Article number
Rated power input
Impact rate
Impact energy per stroke ac-
cording to
EPTA-Procedure 05/2009
Tool holder
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
The appliance meets IEC 61000-3-11 requirements and is subject to conditional connection. The appliance can lead to occa-
sional voltage fluctuations under unfavorable power conditions. The impedance of this appliance is set as Z
user must make sure, that the connection point, with the impedance Z
impedance requirement: Z ≥ Z
actual
thority.

Noise/Vibration Information

Noise emission values determined according to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN IEC 62841-2-6:
h
Chiselling:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
Bosch Power Tools
(4) Knurled nut with carrying handle
(5) Lock bolt (GSH 16-30)
(6) Tool retainer (GSH 16-28)
(7) Tool shank
(8) Tool holder
(9) Shoulder
W
-1
min
J
mm
kg
. If Z is unknown, determine Z
max max
dB(A)
dB(A)
dB
2
m/s
2
m/s
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
GSH 16-28
3 611 C35 0..
1750
1280
41
28
18.3
/ II
, on which the appliance shall be plugged in meets the
max
in consultation with the network supplier or supply au-
max
GSH 16-28
93
104
2
12.3
1.5
1 609 92A 7U5 | (19.01.2023)
English | 13
GSH 16-30
3 611 C35 1..
1750
1280
41
30
16.9
/ II
= 0.32 Ω. The
actual
GSH 16-30
93
104
2
12.4
1.5