Product Description And Specifications - Bosch GBH 18V-26 D Professional Originalbetriebsanleitung

16 | English
Do not touch any application tools or adjacent housing
u
components shortly after operation. These can become
very hot during operation and cause burns.
The application tool may jam during drilling. Make
u
sure you have a stable footing and hold the power tool
firmly with both hands. Otherwise you could lose con-
trol of the power tool.
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS-plus drill chuck
(2) SDS-plus tool holder
(3) Dust protection cap
(4) Locking sleeve
(5) Rotational direction switch
(6) Handle (insulated gripping surface)
(7) On/off switch
a)
(8) Battery
(9) Battery release button
(10) Worklight
(11) Release button for impact/mode selector
switch
(12) Impact/mode selector switch
(13) Button for depth stop adjustment
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) Button for battery charge indicator
(17) Battery charge indicator
1 609 92A 854 | (14.09.2022)
(18)
(19)
(20)
(21)
(22)
a) Accessories shown or described are not included with the
Technical Data
Rotary hammer
Article number
Rated voltage
Rated power input
Impact rate
Impact energy per stroke
according to EPTA-Proced-
ure 05:2016
Rated speed
– Clockwise
– Anticlockwise
Tool holder
Spindle collar diameter
Max. drilling diameter
– Concrete
– Masonry (with hollow
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient temper-
ature during operation
and during storage
Recommended re-
chargeable batteries
a)
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 18V
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/Vibration Information
a) Noise emission values determined according
to EN IEC 62841-2-6.
a)
Securing screw for keyed chuck
a)
Keyed chuck
SDS-plus shank for drill chuck
Chuck key
Universal holder with SDS-plus shank
product as standard. You can find the complete selection of
accessories in our accessories range.
A)
A)
min
min
min
core bit)
B)
C)
8.0Ah.
a)
a)
a)
GBH 18V-26 D
3 611 J16 0..
V= 18
W 425
-1
0–4350
J 2.5
-1
0–980
-1
0–980
SDS plus
mm 50
mm 26
mm 68
mm 13
mm 30
kg 2.9–4.0
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools