Use; Device Overview; Operation; Led Status Display - Intenso MAGNETIC WIRELESS CHARGER BS13 Bedienungsanleitung

USE

Device overview

1 - Charging area (smartphone)
2 - Status LED
3 - USB-C IN
4 - Charging area (TWS)
5 - Charging area (Apple Watch)

Operation

LED status display

When you connect the device to the mains, the LED flashes green once and blue once to confirm and
then stays off. If you use the stand to charge a smartphone or the TWS area to charge your headphones,
the charging process is indicated by the LED on the front. During the charging process, the LED lights up
blue continuously. When the mobile device is fully charged, the LED usually changes from blue to green
(depending on the device being charged). If the LED flashes blue quickly, there is an error; for example, the
device is not positioned correctly, it has become too hot, there is a foreign object between the devices, or
an incompatible power supply unit is being used. If you are using the charging area for the Apple Watch, the
LED does not light up; the watch's display indicates the charging process.
Start-up / charging compatible devices
Step 1: Preparation
Connect one end of the supplied USB-C to USB-C cable to the USB-C port (USB-C IN) of the inductive char-
ging station and connect the other end of the USB cable to the supplied power supply unit (HP8). Next,
connect the power supply unit to a power socket (follow the safety instructions).
Step 2: Start charging
You can charge three different devices (simultaneously) with this wireless charger.
a) Stand
You can charge your smartphone that supports the Qi standard via the stand. This works vertically and also
horizontally. Place your smartphone in the centre of the stand and the charging process starts automatical-
ly. The LED now lights up blue continuously during the charging process.
a) TWS
The TWS area (lower area behind the stand) of the device can be used to charge all devices that support
the Qi standard. These can be, for example, headphones or smartwatches from other manufacturers. To
find out whether your device supports wireless charging via Qi, please refer to the corresponding operating
instructions or contact the manufacturer. Place your device so that the Qi area of the device is centred
on the cross of the charging area. The charging process starts automatically, and the LED lights up blue.
1
2
EN - Page 4 of 6
5
4
3