How To Remove And Install: Door126 - Electrolux EB6L40XCN Benutzerinformation

CARE AND CLEANING
Select Menu / Cleaning
and press three times.
Duration: 1 h.The catalytic enamel is self cleaning, do not clean it with a cloth.
11.4 How to remove and install: Door
You can remove the door and the internal glass panels to clean it. The number of glass panels
is different for different models.
WARNING!
The door is heavy.
CAUTION!
Carefully handle the glass, especially around the edges of the front panel. The
glass can break.
Step 1 Fully open the door.
Step 2 Lift and press the clamping
levers (A) on the two door
hinges.
Step 3 Close the oven door to the first opening position (approximately 70° angle). Hold the
door at both sides and pull it away from the oven at an upwards angle. Put the door
with the outer side down on a soft cloth on a stable surface.
Step 4 Hold the door trim (B) on the
top edge of the door at the
two sides and push inwards
to release the clip seal.
Step 5 Pull the door trim to the front
to remove it.
Step 6 Hold the door glass panels on
their top edge one by one and
pull them up out of the guide.
126/136
Clean the oven with catalytic cleaning
When the cleaning ends the
signal sounds. The oven turns
off.
When the oven is cold,
clean the cavity with a wet
A
2
B
soft cloth.
A
1