Beurer FM 120 Gebrauchsanweisung Seite 17

Follow the steps below to start the foot massage:
Step 1: Placing the device on the floor
1. Place the device on an even, hard surface. Position the device in front of your
chair so that you can reach the device comfortably with your feet when sitting.
Make sure that you do not trip over the mains cable.
2. Insert the mains adapter into a suitable socket. The ON/OFF symbol (
device starts to flash green. The device is now in standby mode.
Step 2: Placing your feet in the device
You can use the device either barefoot or with socks.
Slip your feet into the device. Ensure that the soles of your feet are placed on the massage
heads.
Step 3: Switching on the device
Press the ON/OFF button
ON/OFF button will light up continuously and mode 1 will be activated.
10
Step 4: Setting the mode
The device has three different massage modes. Select a mode using the mode button
Mode 1: lights up green,
Mode 2: does not light up,
Mode 3: lights up green,
Step 5: Adjusting the intensity
For the air pressure massage, the foot massager has three intensity levels (low, medium, high). Select your
desired intensity level using the intensity button
lights up faint green
lights up normal green
lights up intensely green = high intensity of air pressure massage
Step 6: Switching the heat function on/off
The foot massager has an optional heat function to warm up your feet during the massage. To switch the
heat function on or off, press the heat button
lights up red
does not light up = heat function switched off
Step 7: Switching off the device
To switch off the device after use, press the ON/OFF button
starts to flash green. The device is now in standby mode. Remove the mains adapter from the mains
socket.
on the remote control to switch on the device. The LED of the
10
lights up faint green = massage and air pressure
lights up faint green = air pressure only (without massage)
does not light up
= low intensity of air pressure massage
= medium intensity of air pressure massage
= heat function switched on
= massage only (without air pressure)
.
8
during the massage.
7
. The ON/OFF symbol (
10
17
) on the
.
9
) on the device