Atag VA8215SLR Gebrauchsanweisung Seite 210

Troubleshooting
Problem
The dishwasher does not start.
42
Possible causes
has not been pressed.
The door is not properly closed.
You have opened the
dishwasher to add more dishes
while a program is in progress.
The door lock has not clicked
into place and locked.
Check whether the Delayed start
option has been selected.
The plug is not plugged into the
wall socket.
A fuse/circuit breaker has been
tripped.
Action
Press until the display
shows "Program started, close
door".
Check.
Close the door and wait. After a
while, the dishwasher continues
the program.
Check the door lock. If it has not
clicked into place and locked,
open the door.
Press and hold and
the display starts flashing. Wait
until it stops flashing (60
seconds). Close the door.
Check that the door lock clicks
into place and locks.
Press and hold for three
seconds if you want to cancel
the Delayed start option.
Check.
Check.
until