Open Source Announcement; How To Reset To The Factory Default - Samsung Jet Bot VR50T95 Serie Benutzerhandbuch

Open Source Announcement

The software included in this product contains open source software.
To obtain the source code covered under licenses which have the obligation of publishing
source code (e.g. GPL, LGPL... etc), please visit http://opensource.samsung.com/ and search by
model name.
It is also possible to obtain the complete corresponding source code in a physical medium such
as a CD-ROM; a minimal charge will be required.
The following URL http://opensource.samsung.com/opensource/VR9500_0/seq/0 leads to open
source license information as related to this product. This offer is valid to anyone in receipt of
this information.

How to reset to the factory default

• Turn the Jet Bot on and press and hold the [
indicator turns white and blinks, and the Jet Bot starts factory default setting.
• When the factory default setting is complete, the Jet Bot automatically restarts.
• After the factory default setting, the device status on the SmartThings App changes to offline
status.
– Press and hold the 'Delete device' on the SmartThings App and delete the product.
– After that, register the product with a mobile device.
] + [ ] for 7 seconds. Then the status
English 45