Attaching Boundary Markers - Samsung Jet Bot VR50T95 Serie Benutzerhandbuch

NOTE
• When a Check Notice occurs or when you carry the Jet Bot to another place and start
cleaning, the Jet Bot spins left and right at a 30 degree angle to recognize its location before
it starts cleaning.
• If the Jet Bot cannot recognize its current location, it does not start a set cleaning mode but
starts in Auto Clean.
• The Jet Bot automatically performs a system check and restarts once a week.

Attaching Boundary Markers

If Boundary Markers are attached before using the Jet Bot, the Jet Bot can operate safely. You
can purchase additional Boundary Markers at a service center.
To prevent the Jet Bot from entering the following areas, attach the
Boundary Markers to the floor in a
Approximately 15 cm
Boundary
Markers
Where the raised spot is below 5 cm
1.5 cm
Boundary
Markers
Where a threshold is above 1.5 cm
Approximately
5 cm
Where there is a slide, a swing, a flowerpot,
Where there is a risk of falling such as stairs,
shape with 15 cm space distance.
Boundary
Markers
a fireplace, any flammable substance or
moisture.
Boundary Markers
porches or guardrails.
Approximately
15 cm
English 21