Herunterladen Inhalt Inhalt Diese Seite drucken
Samsung Jet Bot VR50T95-Serie Benutzerhandbuch
Vorschau ausblenden Andere Handbücher für Jet Bot VR50T95-Serie:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Jet Bot
User manual
VR50T95**** Series
• For full manual, Scan QR code or access online at https://www.samsung.com
• Before operating this unit, please read the instructions carefully.
• For indoor use only.

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltszusammenfassung für Samsung Jet Bot VR50T95-Serie

  • Seite 1 Jet Bot User manual VR50T95**** Series • For full manual, Scan QR code or access online at https://www.samsung.com • Before operating this unit, please read the instructions carefully. • For indoor use only.
  • Seite 2 Clean Station Boundary Markers User Manual • If you want to purchase an additional Dust Bag, check the Dust Bag’s model name (VCA-RDB95) and SAMSUNG logo ( ) first, then contact your nearest SAMSUNG Electronics retailer or SAMSUNG service center.
  • Seite 3 0.5 m 0.5 m...
  • Seite 9: Operation And Maintenance

    Operation and maintenance A. Installation B-2 Starting cleaning • Press the [ ] on the Jet Bot to start NOTE cleaning in Auto Clean. • Press the [ ] on the Jet Bot to stop • Install the Clean Station in a place where operation while cleaning.
  • Seite 10: Safety Information

    Failure to meet these requirements could • For information on Samsung’s cause damage to the internal parts of the environmental commitments and product vacuum and void your warranty.
  • Seite 11 Safety information • Do not pull or carry by the cord, use the - Locations with distilled alcohol, thinner, cord as a handle, close the door on the ashtrays with burning cigarettes, etc. cord, or pull the cord around sharp edges •...
  • Seite 12 Safety information • Make sure there are no dangerous objects • To clean all areas of your house, open all around the Jet Bot’s cleaning area to rooms and set the No-go Zones with the prevent collision and unplug any electric SmartThings App or attach the Boundary heaters or fans.
  • Seite 13 Jet Bot and contact a service center. - There is a risk of fire or electric shock. • Please check with a SAMSUNG Electronics CAUTION service center when replacing batteries. - Using batteries from other products can •...
  • Seite 14 Safety information • Be careful that the LiDAR sensor is not exposed to a direct light such as sun light, infrared light, etc. - The direct light can affect the performance of the LiDAR sensor. • When carrying the Jet Bot, be careful not to let it drop.
  • Seite 15: Notes And Cautions

    Notes and cautions Installation • If the Jet Bot is left detached from the Clean Station, the battery will drain naturally. NOTE - Try to keep the Jet Bot being charged on • If the cleaning area is wooden floors, it is the Clean Station.
  • Seite 16 - Dustbin: Completely wipe out the water. service center. - Filter: Completely dry it in the shade • This battery is exclusively for the SAMSUNG before use. Electronics Jet Bot. Do not use it for any • Do not use water to clean the Fine dust other products or purposes.
  • Seite 17 6 [Android] The connection to your wireless Setting up a SAMSUNG account router will be progressed automatically. • You must sign in to a SAMSUNG account - [iOS] Open the setting app, and select the before using the SmartThings App.
  • Seite 18 SmartThings App Functions of the SmartThings App Classification Functions Explanation • You can check the result of the last cleaning. Cleaning Report • You can check the histories of last 50 cleanings. • The Home monitoring feature utilizes a camera on the front of the Jet Bot so you can view what is in front of the Jet Bot.
  • Seite 19 SmartThings App Classification Functions Explanation • You can set the voice guide to [Voice], Sound Mode [Sound Effect], or [Mute]. Language • The Jet Bot supports 14 languages. Volume • You can control the volume of the voice guide. • You can control the sensitivity of detecting the Size of Obstacles to Avoid size of obstacles.
  • Seite 20: Troubleshooting

    Troubleshooting Symptom Checklist • Check if the power switch is on. • Check if the Status Indicator is on. • Check if the Jet Bot's battery is depleted. - When the Jet Bot’s Status Indicator turns red and stays red, place The Jet Bot is not the Jet Bot manually on the Clean Station to charge it.
  • Seite 21: Product Specification

    Transmitter power(Max) 20 dBm • Hereby, Samsung Electronics, declares that the radio equipment type appliance is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support >...
  • Seite 22 To obtain the source code covered under licenses which have the obligation of publishing source code (e.g. GPL, LGPL… etc), please visit http://opensource. samsung.com/ and search by model name. It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM;...
  • Seite 23: Warnings About Battery

    Warnings about battery You must not remove (or attempt to remove) the battery incorporated in this product on your own. To replace the battery, you must contact your service provider or an independent qualified professional. These instructions have been prepared for the exclusive use of your service provider or independent qualified professional.
  • Seite 24 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site www.samsung.com/ch/support (German) SWITZERLAND 0800 726 78 64 (0800-SAMSUNG) www.samsung.com/ch_fr/support (French) AUSTRIA 0800 72 67 864 (0800-SAMSUNG)
  • Seite 25 Jet Bot Benutzerhandbuch Baureiihe VR50T95**** • Ausführliche Anleitung: QR-Code scannen oder online auf https://www.samsung.com • Lesen Sie die Anweisungen sorgfältig durch, ehe Sie das Gerät in Betrieb nehmen. • Es ist nur zum Einsatz in geschlossenen Räumen geeignet.
  • Seite 26: Reinigungsstation

    • Wenn Sie Staubsaugerbeutel nachkaufen möchten, notieren Sie zuerst die korrekte Modellbezeichnung (VCA- RDB95) und überprüfen Sie das SAMSUNG-Logo ( ). Wenden Sie sich dann an den Händler von SAMSUNG Electronics, bei dem Sie das Gerät erworben haben, oder an das SAMSUNG-Kundendienstzentrum. Deutsch...
  • Seite 27: Betrieb Und Pflege

    Betrieb und Pflege A. Aufstellung B-2 Beginnen der Reinigung • Drücken Sie auf die Taste [ ] am Jet Bot, HINWEIS um das Reinigen im Automatikmodus zu starten. • Stellen Sie die Reinigungsstation an einer Stelle mit ebenem Untergrund und geraden •...
  • Seite 28: Sicherheitsinformationen

    Kindern selbst betrieben werden, • Weitere Informationen zu den ist eine sorgsame Aufsicht notwendig. Umweltverpflichtungen von Samsung und zu • Verwenden Sie das Gerät nur so, wie in produktspezifischen gesetzlichen Pflichten diesem Handbuch beschrieben. (z.B. REACH, WEEE; Batterien) finden Sie •...
  • Seite 29 Sicherheitsinformationen Reinigungsstation Jet Bot • Manipulieren Sie den geerdeten Stecker • Saugen Sie keine harten oder scharfen nicht, um ihn an eine ungeerdete Steckdose Gegenstände wie Glas, Nägel, Schrauben, oder ein ungeerdetes Verlängerungskabel Münzen usw. auf. anschließen zu können. • Verwenden Sie das Gerät niemals ohne Filter. •...
  • Seite 30 Sicherheitsinformationen Hinweise zur Stromversorgung • Der Jet Bot ist zum Gebrauch im Haushalt bestimmt. Verwenden Sie ihn deshalb nicht zur Reinigung von Kellern, Dachböden, WARNUNG Lagerräumen, industriell genutzten Gebäuden, Flächen im Außenbereich oder • Beugen Sie der Gefahr eines Stromschlags in feuchter Umgebung (z.
  • Seite 31 Sicherheitsinformationen • Um Ihre ganze Wohnung zu reinigen, • Ehe Sie den Jet Bot einschalten, beseitigen müssen Sie alle Räume öffnen und mit Sie zerbrechliche Objekte wie Rahmen, der SmartThings-App zur Sicherheit Spiegel und Porzellangegenstände, damit der etwaige Sperrzonen festlegen oder Jet Bot ohne Unterbrechung arbeiten kann.
  • Seite 32 • Wenden Sie sich für einen Austausch der beschädigt. Batterien an ein Kundendienstzentrum von SAMSUNG Electronics. • Entfernen Sie vor dem Reinigen alle Gegenstände wie z. B. dünne Elektrokabel - Die Verwendung von Batterien aus anderen (1 cm oder weniger), Socken usw.
  • Seite 33: Hinweise Und Vorsichtsmaßnahmen

    Hinweise und Vorsichtsmaßnahmen Aufstellung • Die Batterie entlädt sich langsam von selbst, wenn der Jet Bot von der Reinigungsstation getrennt ist. HINWEIS - Entfernen Sie den Jet Bot, während er • Stellen Sie die Reinigungsstation bei geladen wird, möglichst nicht von der Holzfußböden am besten in Richtung der Reinigungsstation.
  • Seite 34 Innenräumen (bei 0 °C bis 40 °C) auf. Wattestäbchen usw. aufsaugt. • Wenn die Batterie nicht ordnungsgemäß zu • Wenden Sie sich an ein offizielles SAMSUNG- funktionieren scheint, versuchen Sie niemals, Kundendienstzentrum, wenn Sie Probleme sie eigenständig zu zerlegen. Wenden Sie haben, Fremdstoffe aus der Bürste zu...
  • Seite 35 6 [Android] Die Verbindung mit Ihrem Einrichten eines SAMSUNG-Kontos Drahtlosrouter wird automatisch aufgebaut. - [IOS] Öffnen Sie die Einstellungen • Sie müssen sich bei einem SAMSUNG-Konto und wählen Sie in der Wi-Fi-Liste den anmelden, bevor Sie die SmartThings-App Drahtlosrouter aus.
  • Seite 36 SmartThings-App Funktionen der SmartThings-App Klassifikation Funktionen Erläuterung • Sie können das Ergebnis der letzten Reinigung kontrollieren. Reinigungsbericht • Sie können die Historie der letzten 50 Reinigungen einsehen. • Die Wohnungsüberwachung nutzt eine Kamera an der Vorderseite des Jet Bot, damit Sie sehen können, was sich vor dem Jet Bot abspielt.
  • Seite 37 SmartThings-App Klassifikation Funktionen Erläuterung • Sie können die Sprachführung auf [Stimme], Tonmodus [Toneffekt] oder [Stumm] einstellen. Sprache • Der Jet Bot unterstützt 14 Sprachen. • Sie können die Lautstärke der Sprachführung Lautstärke einstellen. Größe der zu • Sie können die Größenempfindlichkeit für die umfahrenden Erkennung von Hindernissen einstellen.
  • Seite 38: Fehlersuche

    Fehlersuche Problem Checkliste • Kontrollieren Sie, ob der Netzschalter in der Ein-Position steht. • Kontrollieren Sie, ob die Statusanzeige leuchtet. • Kontrollieren Sie, ob die Batterie des Jet Bot leer ist. - Wenn die Statusanzeige des Jet Bot dauerhaft rot leuchtet, müssen Der Jet Bot Sie den Jet Bot manuell in die Reinigungsstation einsetzen, damit er funktioniert...
  • Seite 39: Technische Daten Des Geräts

    Wi-Fi Senderleistung (Max) 20 dBm • Samsung Electronics erklärt hiermit, dass diese Vorrichtung vom Gerätetyp Funkgerät der Richtlinie 2014/53/EU entspricht. Der gesamte Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: Die offizielle Konformitätserklärung ist unter http://www.samsung.com zu finden. Gehen Sie zu Support > Produktsupport durchsuchen und geben Sie den Modellnamen ein.
  • Seite 40 Um den Quellcode zu erhalten, der durch Lizenzen mit einer Pflicht zur Veröffentlichung des Quellcodes geschützt ist (z. B. GPL, LGPL usw.), besuchen Sie bitte http://opensource.samsung.com/ und suchen Sie nach der Modellbezeichnung. Es ist auch möglich, den entsprechenden Quellcode vollständig auf einem Medium wie einer CD-ROM zu erhalten.
  • Seite 41: Warnhinweise Zum Akku

    Warnhinweise zum Akku Sie dürfen den in dieses Produkt eingebaute Akku keinesfalls selbst entfernen oder einen entsprechenden Versuch unternehmen. Wenden Sie sich für einen Austausch des Akkus unbedingt an Ihren Dienstleister oder eine unabhängige qualifizierte Fachkraft. Diese Anweisungen sind ausschließlich für den Gebrauch durch Ihren Dienstleister oder eine unabhängige qualifizierte Fachkraft bestimmt.
  • Seite 43: Manuel D'utilisation

    Jet Bot Manuel d’utilisation Série VR50T95**** • Pour consulter le manuel dans son intégralité, scannez le QR code ou rendez vous sur le site https://www.samsung.com • Avant d’utiliser cet appareil, veuillez lire attentivement les instructions. • Utilisation en intérieur uniquement.
  • Seite 44 • Si vous souhaitez acheter un sac à poussière supplémentaire, vérifiez d’abord le nom du modèle du sac à poussière (VCA-RDB95) et le logo SAMSUNG ( ), puis prenez contact avec votre revendeur SAMSUNG Electronics le plus proche ou avec un centre de dépannage SAMSUNG. Français...
  • Seite 45: Fonctionnement Et Entretien

    Fonctionnement et entretien A. Installation B-2 Démarrage du nettoyage • Appuyez sur le bouton [ ] du Jet Bot pour REMARQUE commencer le nettoyage en mode Nettoyage automatique. • Installez la Clean Station à un endroit où le • Appuyez sur le bouton [ ] du Jet Bot pour sol et le mur sont plats.
  • Seite 46: Consignes De Sécurité

    à • N’utilisez pas le Jet Bot ou la Clean l’appareil (par ex. directive REACH (DEEE, Station s’il/elle a été endommagé(e) d’une batteries)), consultez le site Web : samsung. quelconque façon. com/uk/aboutsamsung/samsungelectronics/ corporatecitizenship/data_corner.html • Si l’aspirateur ne fonctionne pas tel qu’il le devrait, s’il a été...
  • Seite 47 Consignes de sécurité Clean Station • N’insérez aucun objet dans les ouvertures. N’utilisez pas l’appareil si l’une des • N’utilisez pas la prise polarisée avec une ouvertures est obstruée ; nettoyez prise murale ou une rallonge non polarisée. régulièrement les ouvertures pour éliminer •...
  • Seite 48 Consignes de sécurité - Veillez à utiliser une source d’alimentation • Assurez-vous que le Jet Bot n’est pas plongé identique à la tension nominale du chargeur dans des liquides ou en contact avec des liquides (eau, boisson, crasse, etc.). et n’utilisez jamais de multiprise pour alimenter plusieurs appareils en même - Le Jet Bot risque d’être gravement temps.
  • Seite 49 Consignes de sécurité • Ne placez pas d’objets à 0,5 m ou moins des Pendant l’utilisation côtés de la Clean Station ou à 1 m de l’avant de la Clean Station. AVERTISSEMENT • Assurez-vous que le contact de charge de la •...
  • Seite 50 - Risque d’incendie ou d’électrocution. rotatif. En cas de non-respect de cette • Veuillez vous rapprocher d’un centre de consigne, le capteur LiDAR risque de dépannage SAMSUNG Electronics lors du présenter un fonctionnement anormal ou un remplacement de batteries. dysfonctionnement.
  • Seite 51: Remarques Et Mises En Garde

    Remarques et mises en garde Installation période prolongée, par exemple en cas de voyage d’affaires, de vacances, etc.) REMARQUE Utilisation • Si la zone à nettoyer a un sol en bois, le mieux est d’installer la Clean Station dans le REMARQUE sens du sol en bois.
  • Seite 52 • Cette batterie est exclusivement conçue - Filtre : faites-le sécher complètement à pour le Jet Bot de SAMSUNG Electronics. Ne l’ombre avant utilisation. l’utilisez pas pour d’autres appareils ou à • N’utilisez pas d’eau pour nettoyer le filtre à...
  • Seite 53 Application SmartThings L’application SmartThings n’est compatible • Sinon, si vous avez un smartphone SAMSUNG, qu’avec les modèles qui disposent d’une vous pouvez ajouter votre compte SAMSUNG fonction Wi-Fi. dans l’application des réglages de votre Si vous n’avez pas de routeur Wi-Fi, vous ne smartphone.
  • Seite 54 Application SmartThings Fonctions de l’application SmartThings Classification Fonctions Explication • Vous pouvez vérifier le résultat du dernier nettoyage. Rapport de nettoyage • Vous pouvez consulter l’historique des 50 derniers nettoyages. • La fonction de surveillance de la maison utilise une caméra située à...
  • Seite 55 Application SmartThings Classification Fonctions Explication • Vous pouvez régler le guide vocal sur [Vocal], Mode sonore [Effet sonore] ou [Sourdine]. Langue • Le Jet Bot prend en charge 14 langues. Volume • Vous pouvez contrôler le volume du guide vocal. Taille des obstacles à...
  • Seite 56: Dépannage

    Dépannage Symptôme Liste de vérification • Vérifiez que le bouton d’alimentation est activé. • Vérifiez que le voyant d’état est allumé. • Vérifiez si la batterie du Jet Bot est complètement déchargée. - Lorsque le voyant d’état du Jet Bot devient rouge et reste fixe, placez Le Jet Bot ne manuellement le Jet Bot sur la Clean Station pour le mettre en charge.
  • Seite 57: Caractéristiques Techniques De L'appareil

    Puissance (maxi.) de l’émetteur 20 dBm • Par la présente, Samsung Electronics déclare que cet appareil de type équipement radio est en conformité avec la Directive 2014/53/UE. Le texte intégral de la déclaration de conformité de l’UE est disponible à...
  • Seite 58 Pour obtenir le code source couvert par des licences ayant l’obligation de publier le code source (par ex. GPL, LGPL, etc.), veuillez consulter le site http:// opensource.samsung.com/ et effectuer une recherche par nom de modèle. Il est également possible d’obtenir le code source complet correspondant sur un support physique tel qu’un CD-ROM ;...
  • Seite 59: Avertissements Concernant La Batterie

    Avertissements concernant la batterie Ne retirez pas (ou n’essayez pas de retirer) la batterie incorporée dans cet appareil par vous-même. Pour remplacer la batterie, vous devez prendre contact avec votre fournisseur de services ou un professionnel qualifié indépendant. Ces instructions ont été...
  • Seite 61: Manuale Dell'utente

    Jet Bot Manuale dell’utente Serie VR50T95**** • Per consultare il manuale completo, scansionare il codice QR oppure visitare https://www.samsung.com • Prima di utilizzare questo prodotto, leggere attentamente le istruzioni. • Solo per uso in interno.
  • Seite 62 Manuale dell’utente perimetrali • Per acquistare un contenitore di raccolta della polvere aggiuntivo, verificare prima il nome del modello (VCA-RDB95) ed il logo SAMSUNG ( ) quindi contattare un rivenditore SAMSUNG Electronics autorizzato o un Centro di assistenza autorizzato SAMSUNG. Italiano...
  • Seite 63: Funzionamento E Manutenzione

    Funzionamento e manutenzione A. Installazione B-2 Avviare la pulizia • Premere [ ] sul Jet Bot per iniziare la NOTA pulizia in modalità Automatica. • Premere [ ] sul Jet Bot per interrompere • Installare la Clean Station in un luogo che la pulizia.
  • Seite 64: Informazioni Di Sicurezza

    • Per ulteriori informazioni sull’impegno • Usare il prodotto solo secondo quanto ambientale di Samsung e sugli obblighi descritto in questo manuale. normativi specifici dei singoli prodotti es. • Non utilizzare il Jet Bot o la Clean Station se REACH (WEEE, Batteries) visitare: samsung.
  • Seite 65 Informazioni di sicurezza Clean station • Non inserire oggetti estranei nelle aperture di ventilazione. Non utilizzare se le aperture • Non modificare la spina polarizzata per sono ostruite; mantenerle libere da polvere, adattarla a una presa non polarizzata o a un residui, capelli o qualunque oggetto possa cavo di prolunga.
  • Seite 66 Informazioni di sicurezza - Non utilizzare un alimentatore di corrente • Accertarsi che Jet Bot non rimanga con caratteristiche diverse dall’originale e impigliato o entri in contatto con alcun tipo non usare una multi-presa per alimentare di liquido (acqua, bevande, ecc.). più...
  • Seite 67 Informazioni di sicurezza • Accertarsi che i contatti della Clean Station ATTENZIONE non siano danneggiati o coperti da sostanze estranee. • L’uso di Jet Bot su tappeti molto alti può danneggiare sia il robot sia il tappeto. • Per le aree molto basse nelle quali Jet Bot - Jet Bot non è...
  • Seite 68 Jet Bot. • Per sostituire le batterie, rivolgersi ad un Centro di assistenza autorizzato SAMSUNG • In presenza sul pavimento di olio per cottura, Electronic. il Jet Bot potrebbe smettere di funzionare a - L’uso di batterie di altri prodotti può...
  • Seite 69: Note E Precauzioni

    Note e precauzioni Installazione • Se Jet Bot viene lasciato scollegato dalla Clean Station, la batteria si scaricherà nel tempo. NOTA - Fare in modo che il Jet Bot sia sempre • E’ meglio installare la Clean Station lungo la caricato nella Clean Station (tuttavia scanalatura dei pavimenti in legno qualora il spegnere il dispositivo e lasciare la Clean...
  • Seite 70 • Questa batteria è indicata esclusivamente ATTENZIONE per un Jet Bot SAMSUNG Electronics. Non utilizzarla per altri prodotti o scopi. • Prestare attenzione alle dita nello smontare/ rimontare il filtro poiché è facile che •...
  • Seite 71 App SmartThings La app SmartThings Samsung è disponibile • In alternativa, se si dispone di uno smartphone SAMSUNG, aggiungere solo nei modelli dotati di una funzione Wi-Fi. l’account nelle impostazione del proprio Se non si dispone di un router Wi-Fi, non è...
  • Seite 72 App SmartThings Funzioni della app SmartThings Classificazione Funzioni Spiegazione • È possibile verificare il risultato dell’ultima pulizia. Rapporto di pulizia • È possibile verificare la cronologia delle ultime 50 pulizie. • La funzione Monitoraggio casa utilizza una telecamera posta nella parte anteriore del Jet Bot in modo da poter visualizzare tutto ciò...
  • Seite 73 App SmartThings Classificazione Funzioni Spiegazione • Per impostare la guida vocale a [Voice], Modalità Audio [Sound Effect] o [Mute]. Lingua • Jet Bot supporta 14 lingue. Volume • Per controllare il volume della guida vocale. Dimensioni degli ostacoli • È possibile controllare la sensibilità di da evitare rilevamento delle dimensioni degli ostacoli.
  • Seite 74: Risoluzione Dei Problemi

    Risoluzione dei problemi Sintomo Checklist • Controllare di aver premuto il tasto di accensione. • Controllare che l’indicatore di stato sia acceso. • Verificare che la batteria di Jet Bot non sia scarica. - Quando l’indicatore di stato di Jet Bot diventa rosso e rimane rosso, Jet Bot non funziona posizionare manualmente Jet Bot nella Clean Station per ricaricarlo.
  • Seite 75: Specifiche Del Prodotto

    Potenza di trasmissione (Max) 20 dBm • Samsung Electronics dichiara che l’apparecchiatura radio aderisce alla direttiva 2014/53/EU. Il testo integrale della dichiarazione di conformità EU è disponibile al seguente indirizzo: La dichiarazione ufficiale di conformità è disponibile su http://www.samsung.com, selezionare supporto>...
  • Seite 76 Per ottenere il codice sorgente coperto da licenze che hanno l’obbligo di pubblicare il codice sorgente (ad es. GPL, LGPL ... ecc.), visitare http://opensource. samsung.com/ e cercare per nome del modello. È inoltre possibile ottenere il codice sorgente corrispondente completo su un supporto fisico come un CD-ROM;...
  • Seite 77: Avvertenze Sulla Batteria

    Avvertenze sulla batteria Non rimuovere o tentare di rimuovere autonomamente la batteria inserita all'interno del prodotto. Per sostituire la batteria, contattare un tecnico qualificato o il Centro di assistenza autorizzato. Queste istruzioni sono state preparate ad uso esclusivo del tecnico o del centro assistenza. AVVERTENZA PER LA PROPRIA SICUREZZA, NON TENTARE DI RIMUOVERE LA BATTERIA AUTONOMAMENTE NÉ...
  • Seite 78 Promemoria...
  • Seite 79 Promemoria...
  • Seite 80 DJ68-00846C-00...

Diese Anleitung auch für:

Jet bot vr950004.00.2134

Inhaltsverzeichnis