Proper Use; Technical Data - EINHELL BG-SH 2 Originalbetriebsanleitung

the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
helmet with an adjustable head strap and
sweatband (BG-SH 2)
•
2 set of ear protectors (BG-SH 2)
•
visor (with bracket) (BG-SH 2)
•
Original operating instructions

3. Proper use

The forestry safety helmet protects its wearer
from head injuries caused by falling or fl ying ob-
jects and impact from stationary objects.
The ear protectors guard the wearer against
noise. The ear protectors are only suitable for
attachment to the Einhell forestry safety helmet
BG-SH 2.
These ear protection attached to head protection
and/or face protection devices shall be fi tted to,
and used only with, the following carrier BG-SH2.
The mounted ear protection are fi tted, adjus-
ted and maintained in accordance with the
manufacturer's instructions.
This mesh visor is designed to protection the user
against eye and face injuries through mechanical
impact. The mesh visor is marked on the brow
protection with a series of numbers and symbols
to indicate the manufacturer, the fi eld of use, the
protector capabilities and performance characte-
Anl_BG_SH_2_SPK13.indb 14 Anl_BG_SH_2_SPK13.indb 14
GB
rizes of the face protector. Earmuff s, helmet and
visor may not be used/sold individually.
WARNING: this mesh visors marked S should not
be used when there is a foreseeable risk of any
hard or sharp fl ying particles.
Any other usage or modifi cation of the forestry sa-
fety helmet is deemed to be improper and carries
a signifi cant risk of accidents. The manufacturer
accepts no responsibility for damage(s) attribu-
table to misuse. The forestry safety helmet is not
intended for commercial use.

4. Technical data

Model name: ......................................... BG-SH 2
Head circumference of helmet: ............. 52-66cm
Size of earmuff : .....................S, M, L (adjustable)
Material of support arm: .............................. POM
Material of ear cover: .................................... ABS
Weight for helmet (grs): ................... approx.700g
Weight (1x ear protectors): .............. approx.234g
EN basic noise attenuation data (Fig. 11):
Frequency
Average
Standard devitation
Minimum required
The forestry safety helmet are classed as Per-
sonal Protective Equipment (PPE) by the Euro-
pean PPE new regulation (EU) 2016/425 and
have been shown to comply with this regulation
through the Harmonized European Standard
EN397:2012+A1:2012 /EN1731:2006/ EN352-
3:2020: Industrial helmet /mesh visor/ helmet-
mounted Protective Earmuff
Marking of forestry safety helmet (BG-SH 2)
(Fig. 12-15)
conform PPE regulation;
Einhell: manufacturer's identifi cation mark (Brand
name)
EN397/EN352-3/EN1731: European standard
BG-SH 2: Type of helmet
BG-SH 2: Type of ear muff mounted helmet
BG-SH 2: The mesh visor
52-66cm: Head circumference of helmet
S: Increased robustness
- 14 -
23.02.2023 14:23:52 23.02.2023 14:23:52